Philips VRZ222AT Manual De Usuario
VCR PLUS+ PROG.
PLUS CODE : – – – – – – – –
TO END PUSH EXIT
34 Timer Recording With the VCR Plus+ Programming System
Follow these steps to set a timer recording with the PlusCode
programming numbers in your TV guide. Before you begin:
programming numbers in your TV guide. Before you begin:
●
Set up the channels at the VCR (page 12).
●
Set up the VCR Plus+ and Cable/TV channel numbers (pages 32
- 33).
- 33).
●
Set the clock (page 15).
●
Put a tape in the VCR.
●
Turn on the VCR power. The VCR light should appear on the
display panel. If it does not, press the VCR/TV button once.
display panel. If it does not, press the VCR/TV button once.
Do each step within 60 seconds of the previous step.
2
Press the VCR PLUS+ button.
3
Press the Number buttons to enter the PlusCode pro-
gramming number of the program you wish to record.
Then, press the VCR PLUS+ button.
gramming number of the program you wish to record.
Then, press the VCR PLUS+ button.
VCR PLUS+ PROG.
PLUS CODE : 13285 – – –
TO SET PUSH VCR+
TO CORRECT PUSH CLEAR
TO END PUSH EXIT
TO CORRECT PUSH CLEAR
TO END PUSH EXIT
4
Press the PLAY/o button or the STOP/p button to select
a ONCE, DAILY, OR WEEKLY recording. Then, press the
F.FWD/B button.
a ONCE, DAILY, OR WEEKLY recording. Then, press the
F.FWD/B button.
●
ONCE: The VCR will record a TV program on any day you
choose, up to 12 months away.
choose, up to 12 months away.
●
DAILY: The VCR will record every day from Monday to Friday
– starting at the same time and recording for the same length of
time.
– starting at the same time and recording for the same length of
time.
●
WEEKLY: The VCR will record on the same day, at the same
time, and for the same length of time every week.
time, and for the same length of time every week.
2
3
4
• CODE ERROR may flash on-screen
after step 3 if you enter an incorrect
number (for example, one that is too
short). The previous screen will
appear. Enter the correct PlusCode
programming number.
number (for example, one that is too
short). The previous screen will
appear. Enter the correct PlusCode
programming number.
• If the VCR PLUS+ CROSS REF. MAP
reappears after step 3, the VCR
PLUS+ channel number for the
recording you entered was higher
than 99. In this case, enter the cor-
rect CABLE/TV channel in the map.
Then, press the MENU button and
continue from step 4.
PLUS+ channel number for the
recording you entered was higher
than 99. In this case, enter the cor-
rect CABLE/TV channel in the map.
Then, press the MENU button and
continue from step 4.
• If CLASH flashes on-screen at step
3, the timer recording you just pro-
grammed and another timer record-
ing overlap. The current timer record-
ing will not occur.
grammed and another timer record-
ing overlap. The current timer record-
ing will not occur.
Helpful Hints
VCR PLUS+ PROG.
→
ONCE
DAILY
WEEKLY
DAILY
WEEKLY
SELECT op CHOOSE B
TO END PUSH EXIT
TO END PUSH EXIT
1
Press the VCR button.
1
REW
PLAY
POWER
VCR PLUS+
SPEED
VCR
TV
MUTE
VCR/TV
CHANNEL
VOLUME
REC/OTR
STATUS/EXIT
MEMORY
PAUSE/STILL
MENU
CLEAR
EJECT
STOP
F.FWD
1
2
3
4
5
6
7
8
9
0
+100
VRZ222 layout 4/8/99 10:19 PM Page 34