Toshiba RD-XV48KE Manual De Usuario

32

EN

Follow the steps below to record a TV programme.

(See page 81 for VCR recording.)

B ON\STANDBY] to turn on 

Turn on the TV and be sure to select the input to 
which the unit is connected.

If you are recording to the HDD, press [HDD], 
then proceed to step 

\CLOSE A] to open the 

\CLOSE A] to close the 

Select the recording mode using 
[REC MODE]. (See page 26.)

G \ H] or 

Press [REC I] to start recording.

The “I HDD” or “I DVD” mark will be displayed 
on the TV screen briefly.

To pause the recording, press [PAUSE F]. Press 
[PAUSE F] or [REC I] again to restart the 
recording.

Press [STOP C] to stop the 
recording.

This operation may take a few moments to 
complete.

• You can change the channel while in the REC 

pause mode.

• Recording continues until the disc is full (as for 

HDD, 12 hours after the recording starts) or you stop 
the recording.

• You cannot change the recording mode in the REC 

or REC pause mode.

• Even if the broadcast you are recording is in the 

SECAM system, this unit automatically converts it to 
the PAL system when recording.

• If the external equipment is connected to AV2, the 

picture of the external equipment will be output 
except during the DVD playback of this unit. Turn off 
the external equipment or press [DISPLAY] to 
output the picture from this unit.

• You can play back a title on one component while 

making a recording on the other component. To do 
so, simply select the component (HDD or DVD) you 
want to use for the playback by pressing [HDD] or 
[DVD] during HDD / DVD recording. And then follow 
the normal playback procedure.

• If playback and recording are in progress at the 

same time, select the appropriate component by 
pressing [HDD] or [DVD] before you press 
[PAUSE F] or [STOP C] to pause or stop the 
operation.

• NTSC recording is prohibited in this unit.

Disc tray guide

E3LG0ED_EN.book  Page 32  Wednesday, April 30, 2008  11:52 AM