Toshiba RD-XV48KE Manual De Usuario

37

EN

You can set the unit to start recording whenever it 
detects the video scart control from the external tuner.

[Preparation of the external tuner]
• The external tuner should be equipped with 

some kind of timer function. Using timer function 
of the tuner, set it to be turned on when it comes 
to the time you want to start recording, and off 
when it comes to the time you want to finish 
recording. (Refer to the tuner’s manual on how 
to set the timer.)

• Make sure to turn off the external tuner when 

you finish setting.

[Preparation of this unit]
• Make sure to select the desired Recording 

mode beforehand.

In stop mode, press [HDD] then 
select the recording mode for HDD 
using [REC MODE].

• “Sat” will appear on the front panel display and 

the unit goes into the Satellite Link standby 
mode.

To cancel the Satellite Link function in the 
Satellite Link standby mode:
Press [

B ON\STANDBY] or [SAT.LINK] to turn on 

the unit.

To cancel the Satellite Link function while the 
Satellite Link Recording is in progress:
Press [C STOP] on the front panel of the unit, or 
press and hold [STOP C] on the remote control for 
2 seconds.

• Recording picture will be distorted if the copy 

protection signal is being detected during Satellite 
Link Timer Recording.

• [SAT.LINK] does not work under the following 

circumstances:
- Setup menus are displayed.
- “Timer Programming” menu is displayed.
- Title list or any file list is displayed.

• When a regular Timer Recording and the Satellite 

Link Timer Recording are overlapped, the examples 
are given below.

Scart cable (not supplied)

External tuner
(not supplied)

Example 1

Example 2

Example 3

Timer 
Recording

Satellite Link

Actual 
Recording

Timer 
Recording

Satellite Link

Actual 
Recording

Timer 
Recording

Satellite Link

Actual 
Recording

E3LG0ED_EN.book  Page 37  Wednesday, April 30, 2008  11:52 AM