Toshiba RD-XV48KE Manual De Usuario

40

EN

Before recording from DVC, see page 21 for 
connection instructions. (See page 82 for DVC to VCR Dubbing.)

If you are dubbing to the HDD, press [HDD] first.
If you are dubbing to a disc, press [DVD] first.

Select “DV” channel using 
[INPUT SELECT

F] or 

Press [REC MODE] to select a 
recording mode. (See page 26.)

With “Control” highlighted, press 
[ENTER] to display the available 
devices to control with the remote 
control of this unit. Select “DVC” 
using [

U \ D], then press [ENTER].

e.g.) DVC to DVD dubbing

Now you can operate your DVC with the remote 
control of this unit.

Press [PLAY B] to start playing back 
the DVC, and find where you want to 
start dubbing. 
Press [STOP C] when it comes to the 
desired start point.

Select “Start Rec” using [

The dubbing will start.

Select “Control” using [

U \ D], then press 

[ENTER].

Select “HDD” / “DVD” using [

U \ D] 

(whichever the recording component you 
are using), then press [ENTER].

Press [STOP C].

• The tape will rewind a few seconds when you press 

[ENTER] at step 

 so that the dubbing starts exactly 

where you press [PAUSE F] instead of  [STOP C] 
at step 

.

• The unit does not send out the output signal to DVC.
• For the proper operation, connect DVC to the unit 

directly. Do not connect this unit and DVC via any 
other unit.

• Do not connect more than one DVC.
• The unit can only accept DVC. Other DV device 

such as cable/satellite box or D-VCR cannot be 
recognised.

• If no video signal is detected from the DVC during 

DVC to HDD or DVD dubbing, the recording will be 
paused and “I” will flash on the TV screen. The 
recording will resume when the unit detects the 
video signal again.

• When the DVC is in camera mode, refer to “Guide to 

• Date / time and cassette memory data will not be 

recorded.

• Pictures with a copy-guard signal cannot be 

recorded.

• A DV terminal is a terminal that can use the 

transmission mode conforming to the IEEE 1394 
standards called “Fire Wire”. It serves as the 
interface that connects the PC and peripheral device 
such as “i.Link” (registered trademark of SONY). It 
enables digital dubbing between DV devices with 
little degradation.

• You cannot dub from DVC to both HDD and DVD at 

the same time.

Preparing for DV dubbing (DVC to HDD):
• Make sure your DVC is in video mode.

Preparing for DV dubbing (DVC to DVD):
• Insert a recordable DVD.
• Make sure your DVC is in video mode.

E3LG0ED_EN.book  Page 40  Wednesday, April 30, 2008  11:52 AM