Toshiba RD-XV48KE Manual De Usuario

79

EN

In stop mode, press [SETUP]. Select 
“General Setting” using [

Select “DivX” using [

U \ D], then 

U \ D], then press [ENTER].

For “DivX

VOD”, refer to page 50 for details.

U \ D], then press [ENTER].

When you finish with the setting, 
press [SETUP] to exit.

In stop mode, press [SETUP]. Select 
“General Setting” using [

• Make sure that the HDMI cable is connected and the 

TV input is set to HDMI.

Select “HDMI” using [

U \ D], then 

U \ D], then press [ENTER].

 on pages 79 to 80 and 

When you finish with the setting, 
press [SETUP] to exit.

You can select the colour space for HDMI output.
Set the appropriate colour space for your display 
device.

U \ D], then 

• When the connected device is not compatible with 

the Y/Cb/Cr, HDMI signal is output as RGB 
regardless of the setting.

Your setting is activated.

If you do not want to output the audio through HDMI 
(when you digitally output the audio through the 
DIGITAL AUDIO OUT (COAXIAL) jack to your audio 
system, etc.), you can set the HDMI audio output off.

U \ D], then 

• Set to “OFF” when the HDMI sound is not required.

Your setting is activated.

E3LG0ED_EN.book  Page 79  Wednesday, April 30, 2008  11:52 AM