Toshiba RD-XV48KE Manual De Usuario

85

EN

TV channels cannot be changed.

• Check if the connections are made securely and correctly.
• Check if the cables are damaged.
• Try “Channel” setting by following the steps on pages 22-23.

Only specific channels do not appear.

• The channels may be set to be skipped. (See page 23.)

The external input channels (such as AV2 or 
AV3) cannot be skipped.

• This unit does not skip the external input channels. This is not a 

malfunction.

The image from the external device cannot be 
displayed.

• Try pressing [INPUT SELECT

F] repeatedly.

• Turn on all connected devices.
• Check if the connections are made securely and correctly.

Recording is impossible.

• It is prohibited to make a recording from 2 minutes before the 

programmed start time of a timer recording.

• This unit cannot record programmes that contain copy protection signal. 

This is not a malfunction.

• The space of the recording media may be used up. Try deleting 

unnecessary titles, or exchange it with the recordable media.

• The maximum number of titles or chapters has exceeded. Delete the 

unnecessary titles to make enough space or insert a new recordable 
media.

• Check if the connections are made securely and correctly.

Timer recording cannot be performed.

• The internal clock of the unit may have been stopped due to a power 

failure that lasted for more than 30 seconds. Reset the clock. (See page 25.)

Recording is impossible.

• Check if the disc is CPRM compatible.  Copy-once programmes can only 

be copied onto the disc which is CPRM compatible.

• Check if the disc is protected or finalised. Undo the protection or the 

finalisation. 

• Video mode DVD-RW once formatted in other unit cannot be recorded in 

this unit unless formatted in this unit. 

• Check if the connections are made securely and correctly.

“Repairing” appears on the TV screen.

• If there is a power failure or unplugging during recording, finalising, 

formatting or editing (even after “Repairing” disappears), a repairing 
process will begin automatically just after turning the unit on again.

• It may take several minutes up to about several hours.

In a case you intend to cancel the repairing 
process.

• If you intend to cancel the repairing process, press [A OPEN

\CLOSE] 

on the front panel, then select “Yes” and press [ENTER]. After that, 
press [OPEN

\CLOSE A] to take out the disc. The disc cancelled during 

the repairing process MAY NOT work.

The indication 
“

” does 

not disappear.

• “

” may remain on screen for the 

maximum of 20 seconds even after it reached 100%. This is not a 
malfunction.

Recording does not start immediately after 
pressing [REC I].

• Make sure the videotape has a recorded tab when you record to a 

videotape. If needed, cover the hole with cellophane tape.

TV aspect ratio does not match your TV 
screen.

• Check “TV Aspect” setting. (See page 78.)• A different aspect ratio will be used when the aspect ratio specified by 

the disc is not supported by this unit.

Playback picture is distorted.
Colour of the picture is abnormal.

• During fast forward or fast reverse, playback picture may be distorted. 

This is not a malfunction.

• Connect to TV directly. When you connect this unit with the television via 

VCR or other devices, the picture may be distorted due to the copy-
protection signal.

• Check if the cables are damaged.
• Keep the equipment which may cause electrical disturbances, such as a 

cellular phone, away.

There is no sound, or no subtitle.

• Turn on all connected devices.
• Check if the external input channel is set correctly.
• Check if the connections are made securely and correctly.
• If using the HDMI connection, sound is not output when “HDMI Audio” is 

set to “OFF”.

• Check the RCA audio cable connection. If you are using HDMI-DVI 

conversion cable, you must connect the RCA audio cable, too.

• If using the HDMI connection, check whether the output format of this 

unit (HDMI FORMAT) matches the supported input format of other 
connected device.

E3LG0ED_EN.book  Page 85  Wednesday, April 30, 2008  11:52 AM