Toshiba W-704 Manual De Usuario

1 7

Incoming Antenna/Cable (CATV) Signals

The VCR scans through all receivable TV and CATV channels and stores only the active
ones in your area into the memory.  Once the storing is finished, you can select a desired
channel using 

CH/TRK.

Preparation
• Turn on the TV, and select the video channel (3 or 4), or the video input mode if you made the Audio/Video

connection (page 11).

• Press 

I.SELECT so that the channel number will appear if “L1” or “L2” is displayed in the VCR display.

Incoming Antenna/Cable (CATV) Signals

Press 

PROG. to display the MENU screen.

Select “PRESET” using 

FF or REW,

and press 

ENTER.

Select “CH MEMORY” using 

x2 or STOP, and press ENTER.

Set “TV/CATV“ to “TV” or “CATV” using 

FF or REW.

TV: To store channels received via the antenna.
CATV: To store channels received via the incoming cable.

Select “AUTO SCAN” using 

or 

STOP, and press FF to set to

“ON”.

The VCR starts scanning and the
channels are stored in the VCR in
ascending order. When the scanning is
finished, the screen automatically
returns.

Press 

PROG. to exit.

This section is required if you receive only normal TV or unscrambled cable channels, or use a cable box
between your TV and the VCR.