Toshiba RD-XV47KE Manual De Usuario

102

EN

Press [VCR] first.
To cue or review picture during playback 
(Picture Search):
Press [FWD / SLOW 

f] or [SLOW / REV r] 

during playback.
Press it again and the unit will search in super high 
speed.

To freeze the picture on TV screen during 
playback (Still mode):
Press [PAUSE 

p] during playback. Each time you 

press the button, the picture will be forwarded frame 
by frame.
If the picture begins to vibrate vertically during the still 
mode, stabilise the picture by pressing the 
[PROG.   /  ].
If the picture is distorted or rolling vertically, adjust the 
vertical hold control on your TV, if equipped.

To reset the tape counter:
Press [CLEAR].

To play back in slow motion:
Press [FWD / SLOW 

f] during the still mode.

If the noise bars appear on the TV screen, you can 
reduce it by pressing [PROG.   /  ].

• Still / Slow mode will be automatically cancelled 

after 5 minutes to prevent damage to the tape and 
the video head.

• To return to normal play back from the Picture 

Search / Still / Slow mode, press [PLAY 

P].

Press [VCR] first.
Different countries use different television colour 
systems.
This unit will distinguish the video colour system 
(MESECAM or PAL) automatically according to the 
format of a pre-recorded video tape during playback 
or the input signal from the tuner or external devices.

To change the video colour system manually, press 
[MODE].
Each time you press [MODE], the colour system will 
change as follows.

• If the playback picture on the TV screen is black and 

white, change the video colour system manually.

• When you change the video colour system 

manually, be sure to change it before recording. If 
you select the wrong video colour system for 
recording, the colour of the picture may be 
deteriorated.

This unit will record and playback Hi-Fi stereo sound. 
In addition, it has an AV2 and NICAM stereo sound 
decoder. This unit will receive stereo and bilingual 
broadcasts and it is possible to record in several ways 
and to play back the sound.

Selecting the Sound Mode
You can select each mode by pressing [AUDIO ] 
on the remote control. Each mode is indicated on the 
TV screen as following.

• During playback of the recorded tape in Hi-Fi mode

• During reception of bilingual broadcasts

• If you play back non-Hi-Fi tapes, the unit will play 

back automatically in monaural even if you select 
any mode.

• If the stereo signal becomes weak, the broadcast is 

automatically recorded in monaural.

Stereo

Stereo

STEREO

L

L audio from both speakers

LEFT

R

R audio from both speakers

RIGHT

Normal

Monaural

MONO

Main

Main audio from the both 
speakers

Main

Sub

Sub audio from the both 
speakers

Sub

Main / 

Sub

• Main audio from the left 

speaker

• Sub audio from the right 

speaker

Main

Sub

E3B90ED_EN.book  Page 102  Friday, February 23, 2007  12:38 PM