Toshiba RD-XV47KE Manual De Usuario
93
EN
In
troducti
on
Connecti
o
ns
Bas
ic Setup
P
layback
Ed
iti
iti
n
g
V
CR Fu
ncti
on
s
s
O
th
ers
Fu
nc
ti
nc
ti
on
Set
Set
u
p
Recordi
n
g
Digital Audio Setting
1
1
Press [SETUP] in stop mode.
Setup Menu will appear.
2
Select “Digital Audio Setting” using
[Cursor
[Cursor
U
/
D
], then press [ENTER].
3
Select a desired item using
[Cursor
[Cursor
U
/
D
], then press [ENTER].
4
Refer to 1. to 5. on pages 93 to 94
and set the selected item.
and set the selected item.
5
When you finish with the setting,
press [SETUP] to exit.
press [SETUP] to exit.
1. Down Sampling (Default: 48kHz)
Set the Down Sampling.
(Follow steps 1 to 2 above.)
Select “Down Sampling” using
[Cursor
[Cursor
U
/
D
], then press [ENTER].
Option window will appear.
Select the desired setting using
[Cursor
[Cursor
U
/
D
], then press [ENTER].
The selected setting will be checked and
activated.
activated.
48kHz: If your amplifier / decoder is NOT compatible
with 96 kHz PCM, select “48kHz”. Sound
recorded at 96 kHz is down sampled to
48 kHz.
recorded at 96 kHz is down sampled to
48 kHz.
96kHz: If your amplifier / decoder is compatible with
96 kHz PCM, select “96kHz”. Sound is
sampled at 96 kHz.
sampled at 96 kHz.
Note
When playing back disc with copyright protection:
• Even if you select “96kHz”, the sound will be down
• Even if you select “96kHz”, the sound will be down
sampled at 48 kHz.
2. Dolby Digital (Default: Bit Stream)
Set the Dolby Digital.
(Follow steps 1 to 2 on the left.)
Select “Dolby Digital” using
[Cursor
[Cursor
U
/
D
], then press [ENTER].
Option window will appear.
Select the desired setting using
[Cursor
[Cursor
U
/
D
], then press [ENTER].
The selected setting will be checked and
activated.
activated.
Bit Stream: Outputs Dolby Digital signals.
If your amplifier / decoder is compatible
with Dolby Digital, set to “Bit Stream”.
PCM:
Converts the Dolby Digital into PCM
(2 channel).
If your amplifier / decoder is NOT
compatible with Dolby Digital, set to
“PCM”.
Hint
When playing back the HDD or a DVD-RW disc
recorded in VR mode:
• If the audio source on a disc is in Dolby Digital
recorded in VR mode:
• If the audio source on a disc is in Dolby Digital
format, set “Dolby Digital” to “PCM” so that you can
switch to main audio (L), sub audio (R), or a
combination of both (L / R) using your amplifier /
decoder.
switch to main audio (L), sub audio (R), or a
combination of both (L / R) using your amplifier /
decoder.
3. MPEG (Default: PCM)
Set the MPEG.
(Follow steps 1 to 2 on the left.)
Select “MPEG” using [Cursor
U
/
D
],
then press [ENTER].
Option window will appear.
Select the desired setting using
[Cursor
[Cursor
U
/
D
], then press [ENTER].
The selected setting will be checked and
activated.
activated.
Bit Stream: Outputs MPEG Audio signals.
If your amplifier / decoder is compatible
with MPEG, set to “Bit Stream”.
with MPEG, set to “Bit Stream”.
PCM:
Converts MPEG into PCM.
If your amplifier / decoder is NOT
compatible with MPEG, set to “PCM”.
If your amplifier / decoder is NOT
compatible with MPEG, set to “PCM”.
Setup Menu
01/01/07(Mon)
19:34
Disc Management
Editing
Editing
Dubbing
Dubbing
Timer Programme
Timer Programme
Title List
Title List
Initial Setting
Initial Setting
Digital Audio Setting
Playback
Playback
Recording
Recording
Display
Display
01/01/07(Mon)
19:34
Digital Audio Setting
Dolby Digital
Dolby Digital
MPEG
MPEG
DTS
DTS
Dynamic Range Control
Dynamic Range Control
Down Sampling
96kHz
96kHz
48kHz
PCM
PCM
Bit Stream
Bit Stream
PCM
E3B90ED_EN.book Page 93 Friday, February 23, 2007 12:38 PM