Toshiba W-701 Manual De Usuario

3 6

Setting Control Codes

Press 

TV to set the remote control operating your TV.

While holding down 

PROG., enter

the two digits of your TV’s brand
code (listed right) using 

buttons.

Release 

PROG..

Point the remote control at your TV and use each button listed
below to make sure that your TV is operated correctly.

POWER

To turn the TV on or off.

CH/TRK

To select TV channels in the upper or lower
direction.

TV VOL

To adjust the sound level.

I.SELECT

To select an external source such as a VCR.

Number buttons To select TV channels. When selecting channels

1 to 9, first enter 0 and then the desired number.

100

To substitute for 100 channel key.

DISPLAY

To turn on or off TV’s screen display.

ENTER

To use for the TV’s ENTER key.

Important
Some TVs may not respond to all the operations above, or
may not be operated at all with this remote control.  In this
case, operate your TV with its own remote control.

Notes
• For some brands, several control codes (brand codes) are allocated. Try

each of them until the buttons work on your TV.

• If you replace the remote control’s batteries, set the brand code again.

The remote control can be compatible with various brands of TV by setting their control codes.  The
TOSHIBA code has initially been set to control TOSHIBA TVs.

Hold down.

Example