Toshiba RD-XV48DTKF Manual De Usuario

41

EN

If you are using a DVD-RW/+RW disc, you can format 
the disc by performing “Format”. You can format DVD-
RW disc for either Video mode recording or VR mode 
recording. DVD+RW disc can be formatted in order to 
erase all content of the disc.

• When you reformat the disc, the contents of the disc 

are erased.

• Make sure that the recording format is set to the 

desired mode. (Refer steps 

Select “Format” using [

U \ D], then 

Select “Start” using [

U \ D], then 

For DVD+RW, use [

U \ D] to select “Yes”, then 

press [ENTER].

A pop up window will appear and prompt you to 
confirm.

Select “Yes” using [

U \ D], then 

e.g.) VR mode DVD-RW

Formatting will start.
If you want to cancel formatting, select “No”.

• It is not possible to use a disc formatted with this unit 

in other DVD recorder. When you use a disc with 
another DVD recorder, format a disc using that DVD 
recorder.

This unit can receive bilingual broadcasts.

You can switch between modes by pressing 
[AUDIO

D]. Each mode is indicated on the TV. 

When you record a DVB channel, only output sound 
channel will be recorded.

When the external input audio is a bilingual 
broadcast, you can choose “Stereo” or “Bilingual” to 
record on an HDD/DVD. This setting is only for 
recording external input (AV1/AV2/AV3).

In stop mode, press [SETUP]. Select 
“General Setting” using [

Select “Recording” using [

U \ D], 

Select “External Input Audio” using 
[

U \ D], then press [ENTER].

Select “Stereo” or “Bilingual” using 
[

U \ D], then press [ENTER].

Press [SETUP] to exit.

• If you select “Stereo”:

The audio will be recorded as “stereo audio”.

• If you select “Bilingual”:

The audio will be recorded as “bilingual audio”. (See 
“Setting Bilingual Recording Audio” on page 42 for 
more detail.)

E3NG0FD_EN.book  Page 41  Wednesday, January 30, 2008  10:37 AM