Toshiba W-727 Manual De Usuario

The VCR scans through all receivable TV and CATV channels and stores only the active
ones in your area into the memory.  Once the storing is finished, you can select a desired
channel using 

Preparation
• Turn on the TV, and select the video channel (3 or 4), or the video input mode if you made the Audio/Video

connection (page 11).

• Press 

I.SELECT so that the channel number will appear if “L1” or “L2” is displayed in the VCR display.

Press 

. to display the MENU screen.

Select “PRESET” using 

or 

,

and press 

.

Select “CH MEMORY” using

 or 

, and press

.

Set “TV/CATV“ to “TV” or “CATV” using 

 or 

.

TV: To store channels received via the antenna.
CATV: To store channels received via the incoming cable.

Select “AUTO SCAN” using

 or 

, and press 

  to

set to “ON”.

The VCR starts scanning and the
channels are stored in the VCR in
ascending order. When the scanning is
finished, the screen automatically
returns.

Press 

twice to exit.

This section is required if you receive only normal TV or unscrambled cable channels, or use a cable box
between your TV and the VCR.

AUTO  SCA

n

          2  CH              on

W-727/Eng (10-18) 

2/28/02, 3:56 PM

16