Sony SLV-SE610B Manual De Usuario

52

Recording TV programmes using the Dial Timer (SLV-SE810B only)

To return to the previous step, press the CHAINE + and – buttons on the 
VCR at the same time during any of the Dial Timer settings.

To stop the VCR while recording, press 

x STOP.

To use the VCR before a recording begins, just press 

?/1.  The   indicator 

turns off and the VCR switches on.  Remember to press 

?/1 to reset the VCR 

to recording standby after using the VCR.

You can also do the following tasks while the VCR is recording:

• Reset the counter (page 44).
• Display tape information on the TV screen (page 47).
• Check the timer settings (page 68).
• Watch another TV programme (page 47).

Press   PROG.

The programme position or station name appears in the display 
window.

Turn   PROG to set the programme position.

To record from a decoder or other source connected to the LIGNE-1 
(TV) or ENTREE LIGNE2 connector, turn   PROG or press 
CHOIX ENTREE to display “L1” or “L2” in the display window.

Press   PROG to complete the setting.

“OK” appears in the display window for about five seconds.

The 

 indicator appears in the display window and the VCR stands 

by for recording.

To record from a decoder or other source, leave the connected 
equipment switched on.

   PROG

   PROG

CHOIX

ENTREE

   PROG