Sony SLV-SE240G/I Manual De Usuario
76
Specifications
Specifications
System
Channel coverage
PAL (I)
VHF IA to IJ, SA10 to SA13*
UHF B21 to B69
CATV S01 to S05, S1 to S20*
HYPER S21 to S41*
VHF IA to IJ, SA10 to SA13*
UHF B21 to B69
CATV S01 to S05, S1 to S20*
HYPER S21 to S41*
RF output signal
UHF channels 21 to 69
Aerial out
75-ohm asymmetrical aerial socket
Tape speed
SP:PAL23.39 mm/s (recording/playback)
NTSC33.35 mm/s (playback only)
LP:PAL11.70 mm/s (recording/playback)
NTSC16.67 mm/s (playback only)
EP:NTSC11.12 mm/s (playback only)
NTSC33.35 mm/s (playback only)
LP:PAL11.70 mm/s (recording/playback)
NTSC16.67 mm/s (playback only)
EP:NTSC11.12 mm/s (playback only)
Maximum recording/playback time
10 hrs. in LP mode (with E300 tape)
Rewind time
Approx. 1 min. (with E180 tape)
* SLV-SE740I and SE240I only
Inputs and outputs
LINE-1 (EURO AV)
21-pin
Video input: pin 20
Audio input: pins 2 and 6
Video output: pin 19
Audio output: pins 1 and 3
Video input: pin 20
Audio input: pins 2 and 6
Video output: pin 19
Audio output: pins 1 and 3
LINE-2/LINE-3
21-pin
Video input: pin 20
Audio input: pins 2 and 6
Video input: pin 20
Audio input: pins 2 and 6
t LINE-2 L o R*
1
VIDEO IN, phono jack (1)
Input signal: 1 Vp-p, 75 ohms,
unbalanced, sync negative
AUDIO IN, phono jack (2)
Input level: 327 mVrms
Input signal: 1 Vp-p, 75 ohms,
unbalanced, sync negative
AUDIO IN, phono jack (2)
Input level: 327 mVrms
Input impedance: more than 47 kilohms
AUDIO (OUT) R, L*
2
Phono jack (2)
Rated output level: 327 mVrms
Load impedance: 47 kilohms
Output impedance: less than 10 kilohms
Rated output level: 327 mVrms
Load impedance: 47 kilohms
Output impedance: less than 10 kilohms
*
1
SLV-SE840G only
*
2
not available on SLV-SE240G/I
General
Power requirements
220 – 240 V AC, 50 Hz
Power consumption
• SLV-SE240G/I
15 W
1.2 W (POWER SAVE is set to ECO2,
minimum)
1.2 W (POWER SAVE is set to ECO2,
minimum)
• SLV-SE840G and SE740G/I
17 W
1.3 W (POWER SAVE is set to ECO2,
minimum)
1.3 W (POWER SAVE is set to ECO2,
minimum)
Operating temperature
5
°
C to 40
°
C
Storage temperature
–20
°
C to 60
°
C
Dimensions including projecting parts and
controls (w/h/d)
controls (w/h/d)
Approx. 360 × 95 × 255 mm
(SLV-SE240G/I)
Approx. 430 × 96 × 255 mm
(SLV-SE840G and SE740G/I)
(SLV-SE240G/I)
Approx. 430 × 96 × 255 mm
(SLV-SE840G and SE740G/I)
Mass
Approx. 2.8 kg (SLV-SE240G/I)
Approx. 3.1 kg (SLV-SE840G and
SE740G/I)
Approx. 3.1 kg (SLV-SE840G and
SE740G/I)
Supplied accessories
Remote commander (1)
R6 (size AA) batteries (2)
Aerial cable (1)
R6 (size AA) batteries (2)
Aerial cable (1)
Design and specifications are subject to
change without notice.
change without notice.