Hitachi VT-DX815A Manual De Usuario

D-VHS RECORDING STEP 

 

57

Notes: 
• A D-VHS tape should be used for D-VHS recording. 
• The VCR and DSS® box must be connected via a digital A/V cable. 
• You may use a blank tape or you may record over a previously recorded 
(erasable) tape. 
• D-VHS recording will automatically be done in the STD mode. The recording 
speed will not appear in the VCR's display. 
• Recording may not be possible immediately after the digital A/V cable has been 
unplugged or plugged in. Wait for at least 15 seconds and then start recording. 

1 Turn on the TV and select the video channel (3 or 4). 
Or, if you are hooked up with an audio/video cable, set the TV to AUX or 
VIDEO. 

 

 pic 

pic 
The power comes on automatically and the tape indicator lights on the 
display. 
• If a cassette without its safety tab is inserted, playback starts 
automatically, and you cannot complete the record operation. 

pic 

3 Press the DSS/VCR button on the remote control so that a DSS® 
program appears on the TV screen. 
pic 
• The dSS indicator will light in the VCR's display. 

4 Use the DSS® box to select the DSS® channel you want to record. 
• The DSS® program will appear. 

 

5 Make sure the D-VHS indicator lights. 
pic