JVC HR-J745EK Manual De Usuario

ACCESS PROGRAMME

DISPLAY AND/OR SCREEN

Press PROG. CHECK.

● The display panel shows the programme start time.

Pressing OK changes the display to the programme
stop time, then the date and preset position.

● If the recorder is turned on and the TV is set to its

VIDEO channel or AV mode, you can check program
information on screen as well.

● Each time you press PROG. CHECK, the next

programme's information appears.

If All Information Is Correct . . .
. . . programming is completed.
If You Wish To Revise Data . . .
. . . with the recorder's power turned on, go to step 2.
If You Wish To Cancel A Program . . .
. . . with the recorder's power turned on, press CANCEL.

All information you input is deleted.

REVISE PROGRAMME

INFORMATION

Input the appropriate data using the START +/–, STOP
+/–, DATE +/– and TV PROG. +/– buttons on the
remote control.

If you have programmed your
recorder to timer-record a
programme or a series of
programmes, a warning appears on
screen to tell you that the recording
is to start in 5 minutes.

● The warning only appears if

you’re not in the Timer mode at that time.

● If this recorder is being used as the player for tape dubbing,

the warning screen is recorded on the tape in the other video
recorder.

The warning blinks for the entire 5 minutes leading up to the
start of timer recording. To clear the display, press CANCEL.

1

2

4

5

3

6

8

0

7

9

2

4

1

3

q