JVC 0302MNV*ID*JVE Manual De Usuario
Masterpage:Right-NoTitle0
EN
23
Filename [HRS5950EU2-EN.fm]
Page 23
February 20, 2002 11:23 am
D
Set the tape speed.
Press SP/LP (
p).
E
Set the VPS/PDC mode.
Press VPS/PDC to select “ON” or “OFF”.
● If “VPS/PDC ON” is displayed on the TV screen, VPS/PDC is
set to ON.
● If “VPS/PDC OFF” is displayed on the TV screen, VPS/PDC is
set to OFF.
墌
“VPS/PDC Recording” on page 25.
F
Return to the normal screen.
Press PROG or OK. “PROGRAM COMPLETED” appears
on the TV screen for about 5 seconds, then the normal
screen appears.
on the TV screen for about 5 seconds, then the normal
screen appears.
● Repeat steps 1 – 6 for each additional programme.
G
Engage the recorder’s timer mode.
Press
# (TIMER). The recorder turns off automatically and
“
#” appears on the front display panel.
● To disengage the timer mode, press
#
(TIMER) again.
NOTES:
● To Change The Stop Time . . .
. . . press STOP +/– after pressing OK in step 3. You can
compensate for anticipated programme schedule delays.
compensate for anticipated programme schedule delays.
● To Timer-Record Weekly Or Daily Serials . . .
. . . after pressing OK in step 3, press WEEKLY (number key
“9”) for weekly serials or DAILY (number key “8”) for daily
serials (Monday — Friday). Either “WEEKLY” or “DAILY”
appears on the TV screen. Pressing the button again makes the
corresponding indication disappear.
“9”) for weekly serials or DAILY (number key “8”) for daily
serials (Monday — Friday). Either “WEEKLY” or “DAILY”
appears on the TV screen. Pressing the button again makes the
corresponding indication disappear.
● You can programme this recorder to timer-record as many as 8
programmes. If you try to programme the recorder to record a
ninth, “PROGRAM FULL” appears on the TV screen. To record
the extra programme, you must first cancel any unnecessary
programmes (
ninth, “PROGRAM FULL” appears on the TV screen. To record
the extra programme, you must first cancel any unnecessary
programmes (
墌
pg. 26).
● It is not possible to timer-record a TV programme with a
S
HOW
V
IEW
number which starts with “0”.
● If there is a conflict in the timer schedule and one programme
overlaps with another, the programme starting earlier or
programme with the lower programme number will be
recorded.
programme with the lower programme number will be
recorded.
Satellite Receiver Users
To timer-record a satellite broadcast using the S
HOW
V
IEW
system:
A Set “L-2 SELECT” to “A/V” (
墌
pg. 31).
B Perform steps 1 – 7.
C Set the satellite receiver to the appropriate channel before
the selected programme begins.
D Leave the satellite receiver’s power on.
ATTENTION
Guide Program Number Set
“GUIDE PROG SET” appears after performing step 3 if the
Guide Program number for the S
Guide Program number for the S
HOW
V
IEW
number you
entered has not been set.
● Press the number keys or
rt
to input the channel
position number on which your recorder receives that
station, then press OK or
station, then press OK or
e
to set the Guide Program
number. The S
HOW
V
IEW
Program screen appears.
(Example)
To timer-record a ZDF
programme with the
S
To timer-record a ZDF
programme with the
S
HOW
V
IEW
system.
* If your recorder receives ZDF on
the channel position 2, press OK
or
the channel position 2, press OK
or
e
after entering “2”.
HRS5950EU2-EN.fm Page 23 Wednesday, February 20, 2002 11:34 AM