Casio 5061 Manual De Usuario

5

 In the World Time Mode, use 

1. 

D

 to select the World 

Time City you want.

 In this example, you would move the 

 

•

x

 Second Hand 

to NEW YORK (NYC) in order to select New York as 

the World Time City.
 Wait until the 

 

•

n

 Right Dial Hands complete their 

move to the time in the currently selected World Time 

City. You will not be able to perform step 2 of this 

procedure until the hands stop moving.

 Hold down 

2. 

B

 for about three seconds until the watch 

beeps.

 This will make the World Time City (

 

•

NEW YORK (NYC) 

in this example) your new Home City. At the same 

time, it will change the Home City you had selected 

prior to step 2 (TOKYO (TYO) in this example), your 

World Time City.
 After swapping the Home City and World Time City, 

 

•

the watch will stay in the World Time Mode. The 
x

 Second Hand will point to your new World Time City 

(TOKYO (TYO) in this example).

 The 

 

•

n

 Right Dial Hands will indicate the current time in your new World Time 

City.

 If your current World Time City supports time calibration signal reception, making 

 

•

it your Home City enables calibration signal reception for that city.

6

@

When the alarm is turned on, an alarm will sound for about 10 seconds each day 

when the time in the Timekeeping Mode reaches the preset alarm time. This is true 

even if the watch is not in the Timekeeping Mode.

Hand Functions
x 

 Second Hand:  

 Indicates the current alarm ON/OFF setting.

v 

 Left Dial Hand:  Points to 

AL.

n 

 Right Dial Hands:  

 Indicate the current alarm time setting in 24-hour 

format.

@

>

6

 Use 

1. 

C

 to move the v Left Dial Hand to AL.

 Use 

2. 

D

 (+) and B (–) to change the alarm time setting.

 Each press of either button will move the 

 

•

n

 Right Dial Hands move one minute.

 Holding down 

 

•

D

 or B will start high-speed hand movement in the applicable 

direction. To stop high-speed hand movement, press any button.
 The alarm always works based on the time kept in the Timekeeping Mode.

 

•

 The watch will return to the Timekeeping Mode automatically if you do not 

 

•

perform any operation in the Alarm Mode for about two or three minutes.

To turn the alarm on or off
In the Alarm Mode, press A to toggle the alarm on and off. The x 

Second Hand will 

indicate the current ON/OFF setting.

To stop the alarm
Press any button.

Strong magnetism or impact can cause the hands and/or date of the watch to be 

off, even if the watch is able to perform the signal receive operation. If this happens, 

perform the applicable home position adjustment procedures in this section.

Note
 Any time after you enter the home position adjustment mode in step 1 of the following 

procedure, you can return to the Timekeeping Mode by pressing A. The watch also 

will return to the Timekeeping Mode automatically if you do not perform any operation 

for about two or three minutes in home position adjustment mode. In either case, any 

adjustments you made before the watch returned to the Timekeeping Mode will be 

applied.

 Hold down 

1. 

C

 for about two seconds until the watch beeps twice and enters the 

Timekeeping Mode.
 Hold down 

2. 

D

 for about three seconds until the watch beeps.

 The watch is now in the home position adjustment 

 

•

mode.
 The watch will exit the adjustment mode automatically 

 

•

if you do not perform any operation for about two or 

three minutes.
 First is 

 

•

x

 Second Hand home position adjustment.

 If the 

 

•

x

 Second Hand moves to 12 o’clock, it is in the 

correct home position. If it doesn’t, use D to move it 

to 12 o’clock.
 Each press of 

 

•

C

 in the home position adjustment 

mode will cycle through the adjustment settings as 

shown below.

@

x

 Second

z

 Hour/ c Minute/ b 24-hour

n

 Right Dial Hands

v

 Left Dial Hand

m

 Day

 After confirming that the 

3. 

x

 Second Hand is at the proper home position, press C. 

This will switch to z 

Hour Hand and c Minute Hand home position adjustment.

 The 

 

•

z

 Hour Hand and c Minute Hand are at their proper home positions if 

they both move to 12 o’clock. The b Lower Dial Hand also will move along with 

z

 Hour Hand movement, and cannot be adjusted individually. If the hands are 

not positioned correctly, use D (+) and B (–) to move them to their proper 

home positions.

 After confirming that the 

4. 

z

 Hour Hand and c Minute 

Hand are in their correct home positions, press C. 

This will switch to n 

Right Dial Hand home position 

adjustment.

 The 

 

•

n

 Right Dial Hands are at their proper home 

positions if they both move to 12 o’clock. If the hands 

are not positioned correctly, use D (+) and B (–) to 

move them to 12 o’clock.

 After confirming that the 

5. 

n

 Right Dial Hands are in the 

correct home position, press C. This will advance to 
v

 Left Dial Hand home position adjustment.

 The 

 

•

v

 Left Dial Hand is in the correct home position if 

it is pointing at 12 o’clock. If it isn’t, use D (+) and B 

(–) to move it to 12 o’clock.

 After confirming that the 

6. 

v

 Left Dial Hand is in the 

correct home position, press C. This will advance to 

day home position adjustment.

 The 

 

•

m

 Day is in the correct home position if it  

shows 1. If it doesn’t, use D (+) and B (–) to change 

the day to 1.

 Press 

7. 

A

 to return to the Timekeeping Mode.

 The 

 

•

m

 Day moves to the current day, and then the z Hour Hand and the 

c

 Minute Hand move to the current time. Wait until everything stops moving.

+

B

*

6

>

5

6

■

■

Refer to “To select a mode”. To return directly to the Timekeeping Mode from any 

other mode, hold down C for about two seconds.

■

■

The x Second Hand is jumping in two-second steps.

■

■

Power may be low. Expose the watch to light until the x Second Hand starts moving 

normally, at one-second steps.

■

■

This could be due to any one of the following causes. In all cases, the hand movement 

does not indicate malfunction, and should stop shortly.

 The watch is recovering from a sleep state.

 

•

 The time setting is being adjusted following a successful auto time calibration 

 

•

signal receive operation.
 The watch is returning to the Timekeeping Mode automatically from the Alarm 

 

•

Mode.

■

■

The watch may be in the power recovery mode. Do not perform any operation until the 

hands return to their normal positions (in about 15 minutes). The hands should return 

to their correct positions when normal operation returns. To help power recover, leave 

the watch in a location where it is exposed to light.

■

■

Your Home City setting may be wrong. Check your Home City setting and correct it, 

if necessary.

■

■

If you are using the watch in an area where time calibration signal reception is 

possible, see “To configure Home City settings”.

If you are using in the watch in an area where time calibration signal reception is 

not possible, you may need to change your Home City’s 

STD (standard time)/DST 

(daylight saving time) setting manually. Use the procedure under “To toggle the 

Home City time between standard time and daylight saving time” to change the 

STD 

(standard time)/

DST (daylight saving time) setting.

■

■

This could indicate that the watch has been exposed to magnetism or strong impact, 

which has caused problems with proper hand and day alignment. Adjust the watch’s 

hand and day home position alignment.

■

■

The World Time indicated by the n Right Dial Hands in the World Time Mode is 

The 

STD (standard time)/DST (daylight saving time) setting of the selected World 

Time City may be wrong. Select the correct 

STD (standard time)/DST (daylight saving 

time) setting.

■

■

The World Time indicated by the n Right Dial Hands in the World Time Mode 

Your Home City setting may be wrong. Check your Home City setting and correct it, 

if necessary.

■

■

This can happen after the power level drops to Level 3. Continue exposing the watch 

to light until the x Second Hand starts moving normally (at one-second steps).

■

■

The x Second Hand starts to move at one-second steps, but then suddenly 

The watch probably is not sufficiently charged yet. Continue keeping it exposed to 

light.

The information in this section applies only when 

LONDON (LON), PARIS (PAR), 

ATHENS (ATH), HONOLULU (HNL), ANCHORAGE (ANC), LOS ANGELES (LAX), 

DENVER (DEN), CHICAGO (CHI), NEW YORK (NYC), HONG KONG (HKG), or 

TOKYO (TYO) is selected at the Home City. You need to adjust the current time 

manually when any other city is selected as the Home City.