Casio MA0811-EA Manual De Usuario

3

You can perform the following procedures to adjust the time and date when the watch is unable to 
receive a time calibration signal for some reason.

■ To enter the adjustment mode

During normal timekeeping, hold down the 

A button for about fi ve seconds until the second hand moves 

to “READY” and then to either AM or PM, depending on the current time setting. 

!BOUT

!-

0-

0-

BUTTON
-OVES

BUTTON
!-0-

s

AFTER

• Holding the B button will cause the second hand to start to move at 

high speed. To stop high-speed hand movement, press the 

B button 

again. High speed hand movement also will stop automatically if the 
hour hand completes one revolution (12 hours).

•  The watch will exit the adjustment mode automatically if you do not perform any operation for 

If the time setting of your watch is not correct even though time calibration signal reception is being 
performed normally, use the procedure in this section to check the home positions of the hands 
and make adjustments as required. 
Note that you do not need to perform the following operation if your watch is showing the correct 
time. 

■ To enter the home position adjustment mode

•  During normal timekeeping, hold down the B button and then the A button, keeping both buttons 

depressed for about fi ve seconds until the second hand stops in the vicinity of 12 o’clock.

!BOUT

BUTTON

-OVES

#LOCKWISE

(OME

s

THE

POINTED

ISNT

ADJUST

(OME

s

HANDS

POSITIONS

POINTED

THEY

BUTTON

BUTTON

-OVES

MINUTE

#LOCKWISE

AND

• Holding the B button during second, hour, and minute hand 

adjustment will cause the second hand to start to move at high speed. 
High-speed movement will continue even if you release the 

B button. 

To stop high-speed hand movement, press the 

B button again. 

High-speed second hand movement will stop automatically after the 
hand completes a 60-second revolution. High-speed hour and minute 
hand movement will stop automatically after the hands complete a 
12-hour cycle.

•  The watch will exit the home position adjustment mode automatically if you do not perform any