Casio MA1110-EA Manual De Usuario

1

MA1110-EA

 Your watch may differ somewhat from the one shown in the illustration.

 

•

Minute hand

Hour hand

Second hand

Day

Crown  

(Normal position)

First click  

(Setting Day)

Second click  

(Setting Time)

 Pull the crown out to the 

1. 

second click when the second 

hand is at 12 o’clock position 

and the second hand stops.

 Set the hands by rotating the 

2. 

crown. Rotate the crown to 

move the hands clockwise. 

Move the minute hand four or 

five minutes past the time you 

want to set, and then back it 

up to the proper setting.

 Carefully set the time, 

 

•

making sure to distinguish 

between AM and PM.

 Push the crown back in to the 

3. 

normal position.

 Pull the crown out to the first click.

1. 

 Set the day by rotating the crown.

2. 

 Push the crown back in to the normal position.

3. 

 Avoid changing the date setting while the current time is between 9:00 p.m. and 

 

•

3:00 a.m. 

Stopwatch minute hand

Stopwatch 1/5-second hand

Stopwatch hour hand

The stopwatch lets you measure elapsed time up to 11 hours, 59 minutes, 59.80 

seconds.

For a watch with an elapsed time bezel  

 

■

Rotate the elapsed time bezel to align the 

 mark with the 

minute hand.  

After certain amount of time elapsed, read the graduation on 

the elapsed time bezel which the minute hand points to.  

The elapsed time is indicated.

Elapsed time bezel

 Some water resistant models are equipped with a screw 

 

•

lock crown.

 With such models, you must unscrew the crown in the 

 

•

direction noted in the illustration to loosen it before you can 

pull it out. Do not pull too forcibly on such crowns.

 Also note that such watches are not water resistant while 

 

•

their crowns are loosened. Be sure to screw the crowns 

back in as far as they will go after making any setting.

Accuracy at normal temperature:  

±

20 seconds a month

Display:  3 analog hands (timekeeping hour and minutes, stopwatch 1/5-second),  

3 dials (timekeeping seconds, stopwatch hours and minutes), Day indicator

Stopwatch function:  Measuring capacity: 11:59'59.80" 

Measuring unit: 1/5-second 

Measuring mode: Elapsed time

Battery:  One silver oxide battery (Type: SR936SW)

Approximately 3 years on type SR936SW (assuming one stopwatch operation 60 min./

day)