Casio MA1010-EA Manual De Usuario

E-29

(SPL displayed)

First runner 
finishes.
Display time of 
first runner.

Second runner 
finishes.

Display time of 
second runner.

E-28

The stopwatch lets you measure elapsed time, split times,
and two finishes.

• The display range of the stopwatch is 23 hours,

59 minutes, 59.99 seconds.

• The stopwatch continues to run, restarting from zero

after it reaches its limit, until you stop it.

• The stopwatch measurement operation continues even

if you exit the Stopwatch Mode.

• Exiting the Stopwatch Mode while a split time is frozen

on the display clears the split time and returns to
elapsed time measurement.

• All of the operations in this section are performed in the

Stopwatch Mode, which you enter by pressing 

C (page

E-5).

E-27

1. In the Alarm Mode, use 

D to select the Hourly Time

Signal (

).

2. Press 

B to toggle it on (the hourly time signal on

indicator displayed) and off (the hourly time signal on
indicator not displayed).

• The Hourly Time Signal on indicator is shown on the

display in all modes while the Hourly Time Signal is
turned on.

E-26

1. In the Alarm Mode, use 

D to select an alarm.

2. Press 

B to toggle it on (the alarm on indicator

displayed) and off (the alarm on indicator not
displayed).

• Turning on a daily alarm (

x1

 through 

x5

) displays the

alarm on indicator on its Alarm Mode screen.

• In all modes, the alarm on indicator is shown for any

alarm that is currently turned on.

E-25

4. While a setting is flashing, use 

D (+) and B (–) to change it.

• When setting the alarm time using the 12-hour format, take care to set the time

correctly as a.m. (A indicator) or p.m. (P indicator).

5. Press 

A to exit the setting screen.

Alarm Operation
The alarm sounds at the preset time for about 10 seconds, regardless of the mode the
watch is in.

• To stop the alarm tone after it starts to sound, press any button.

To test the alarm
In the Alarm Mode, hold down 

D to sound the alarm.

E-24

To set an alarm time
1. In the Alarm Mode, use 

D to scroll through the alarm screens until the one whose

time you want to set is displayed.

Alarm 2

Alarm 1

:00 (Hourly Time Signal) 

Alarm 3

Alarm 5

Alarm 4

• To set a one-time alarm, display one of the screens indicated by an alarm number

from 

x1

 through 

x5

.

2. After you select an alarm, hold down 

A until the hour setting of the alarm time

starts to flash, which indicates the setting screen.

• This operation turns on the alarm automatically.

3. Press 

C to move the flashing between the hour and minute settings.

E-23

You can set five independent Daily Alarms. When an
alarm is turned on, the alarm tone sounds when the alarm
time is reached.
You can turn on an Hourly Time Signal that causes the
watch to beep twice every hour on the hour.

• There are six screens in the Alarm Mode. Five are for

daily alarms (indicated by numbers from 

x1

 through

x5

), and one is for the Hourly Time Signal (indicated by

).

• All of the operations in this section are performed in the

Alarm Mode, which you enter by pressing 

C (page

E-5).

E-22

6. After you make the settings you want, press 

A to exit the input screen.

• The date can be set within the range of January 1, 1950 to December 31, 2049.

• The text area display can show only three characters at a time. Longer text scrolls

continuously from right to left. The symbol “   ” indicates that the character to the
left is the last, and the character to the right is first.

E-21

4. While the cursor is in the text area, use 

D and B to scroll through characters at

the current cursor position. Characters scroll in the sequence shown below. Holding
down 

D or B scrolls at high speed.

(Space)

A to Z

0 to 9

 . (Period)

 - (Hyphen)

Press     .

Press     .

5. While the cursor is in the date area, press 

D and B to scroll through digits at the

current cursor position. Holding down 

D or B scrolls at high speed.

• Press B and D at the same time, and the message “CLR” will appear in the

display. The characters in the text area are cleared and today’s date is set as the
target date. You then can make any changes in the date you want.

E-20

Recalling Day Counter Data
In the Day Counter Mode, use 

D (+) and B (–) to scroll through the day counters.

1. In the Day Counter Mode, use 

D (+) and B (–) to

display the day counter you want to set.

2. Hold down 

A until the flashing cursor appears in the

text area. This indicates the input screen.

3. Press 

C to move the flashing in the sequence shown

below.

1st digit

Day

8th digit

Year

Month

Press     .