Casio MA1007-EA Manual De Usuario

3

 Press 

3. 

C

 to move the flashing in the sequence shown below to select other 

settings.

Hour

Minutes

Month

Day

 While a setting is flashing, use 

4. 

D

 and B to change it as described below.

Change the hour and 

minutes

Use D (+) and B (–).

 With the 12-hour format, set the time correctly 

 

•

as a.m. or p.m. (

P indicator).

 To set an alarm that does not include a month 

 

•

and/or day, set   for each setting. 

Change the month 

and day

Press 

5. 

A

 to exit the setting screen.

Alarm Operation 
The alarm tone sounds at the preset time for 10 seconds, regardless of the mode the 

watch is in. In the case of the snooze alarm, the alarm operation is performed a total 

of seven times, every five minutes, until you turn the alarm off.

 Alarm and Hourly Time Signal operations are performed in accordance with the 

 

•

Timekeeping Mode time.

 To stop the alarm tone after it starts to sound, press any button.

 

•

 Performing any one of the following operations during a 5-minute interval between 

 

•

snooze alarms cancels the current snooze alarm operation.

setting screen

To test the alarm 
In the Alarm Mode, hold down D to sound the alarm.

 In the Alarm Mode, use 

1. 

D

 to select an alarm.

 Press 

2. 

A

 to toggle it on and off.

 Turning on a alarm (

 

•

, 

, or 

) displays 

the alarm on indicator on its Alarm Mode screen.

 Turning on the snooze alarm (

 

•

) displays the 

alarm on indicator and snooze alarm indicator on the 

Alarm Mode snooze alarm screen.

 In all modes, the alarm on indicator is shown for any 

 

•

alarm that is currently turned on.

 The alarm on indicator flashes while the alarm is 

 

•

sounding.

 The snooze alarm indicator flashes while the snooze 

 

•

alarm is sounding and during the 5-minute intervals 

between alarms.

 In the Alarm Mode, use 

1. 

D

 to select the Hourly Time 

Signal (

).

 Press 

2. 

A

 to toggle it on and off.

 The Hourly Time Signal on indicator is shown on the 

 

•

display in all modes while this function is turned on.

 

•

 

•

To turn the auto light switch on and off
In the Timekeeping Mode, hold down B for about three seconds to toggle the auto 

light switch on (auto light switch indicator displayed) or off (auto light switch indicator 

not displayed).

 The auto light switch indicator is on the display in all modes while the auto light 

 

•

switch is turned on.

 In order to protect against running down the battery, the auto light switch turns off 

 

•

automatically approximately six hours after you turn it on.

This section contains more detailed and technical information about watch operation. 

It also contains important precautions and notes about the various features and 

functions of this watch.
Graphic Areas 
There are two graphic areas named A and B. The information shown in each graphic 

area depends on the current mode.

 The following table shows the information that appears in graphic areas A and B.

 

•

Timekeeping

Timekeeping Mode seconds 

(10s unit)

Timekeeping Mode seconds 

(1s unit)

World Time

Timekeeping Mode seconds 

(10s unit)

Timekeeping Mode seconds 

(1s unit)

Stopwatch

Sweeps from left to right

Stopwatch time seconds

Countdown Timer

Sweeps from right to left

Countdown time seconds

Alarm

No indication

No indication

When Flash Alert is turned on, the illumination flashes for 

the alarms, the Hourly Time Signal, the countdown alarm, 

and stopwatch auto start.

 In the Timekeeping Mode, hold down 

1. 

A

 until the 

seconds start to flash, which indicates the setting 

screen.

 Press 

2. 

C

 eight times to display the Flash Alert setting 

screen.

 Press 

3. 

D

 to toggle Flash Alert on (

 displayed) and 

off (

 displayed).

 Press 

4. 

A

 to exit the setting screen.

 The Flash Alert setting you select with the above procedure is applied in all modes.

 

•

 When Flash Alert is on, 

 

•

 appears on the timekeeping screen for about one 

second whenever you enter the Stopwatch, Countdown Timer, or Alarm Mode.

The button operation tone sounds any time you press one 

of the watch’s buttons. You can turn the button operation 

tone on or off as desired.

 Even if you turn off the button operation tone, the alarms, 

 

•

the Hourly Time Signal, the countdown alarm, and 

stopwatch auto start all operate normally.

To turn the button operation tone on and off
In any mode (except when a setting screen is on the 

display), hold down C to toggle the button operation tone 

on (mute indicator not displayed) and off (mute indicator 

displayed).

 Holding down 

 

•

C

 to turn the button operation tone on or off also causes the watch’s 

current mode to change.

 The mute indicator is displayed in all modes when the button operation tone is 

 

•

turned off.

 If you leave the watch in the Alarm Mode for two or three minutes without performing 

 

•

any operation, it automatically changes to the Timekeeping Mode.

 If you leave a screen with flashing digits on the display for two or three minutes 

 

•

without performing any operation, the watch automatically exits the setting screen.

Scrolling 
The B and D buttons are used in various modes and setting screens to scroll 

through data on the display. In most cases, holding down these buttons during a scroll 

operation scrolls at high speed.

Initial Screens 
When you enter the World Time or Alarm Mode, the data you were viewing when you 

last exited the mode appears first.

 Resetting the seconds to 

 

•

 while the current count is in the range of 30 to 59 

causes the minutes to be increased by 1. In the range of 00 to 29, the seconds are 

reset to 

 without changing the minutes.

 The year can be set in the range of 2000 to 2099.

 

•

This watch has an EL (electro-luminescent) panel that 

causes the entire display to glow for easy reading in the 

dark. The watch’s auto light switch turns on illumination 

automatically when you angle the watch for reading 

towards your face. 

 The auto light switch must be turned on (indicated by 

 

•

the auto light switch indicator) for it to operate. 

 See “Illumination Precautions” for more important 

 

•

information.

To illuminate the display 
In any mode (except when a setting screen is on the display), press B to turn on 

illumination.

 The above operation turns on illumination regardless of the current auto light switch 

 

•

setting.

 You can use the procedure below to select either 1.5 seconds or 3 seconds as the 

 

•

illumination duration. When you press B, the illumination will remain on for about 

1.5 seconds or 3 seconds, depending on the current illumination duration setting.

 In the Timekeeping Mode, hold down 

1. 

A

 until the 

seconds start to flash, which indicates the setting 

screen.

 While the seconds are flashing, press 

2. 

B

 to toggle the 

setting between 1.5 seconds ( ) and 3 seconds ( ). 

 Press 

3. 

A

 to exit the setting screen.

About the Auto Light Switch
While the auto light switch is enabled, illumination turns on whenever you position 

your wrist as described below in any mode.

Moving the watch to a position that is parallel to the ground and then tilting it 

towards you at more than 40 degrees causes illumination to turn on. 

  Wear the watch on the outside of your wrist.

 

•