Casio MO0805-ED Manual De Usuario

8

MAX

MIN

ASC

DSC

A

1. Enter the Data Recall Mode.
2. Press B to display the historical record screen (TTL REC).
3. Use A and C to scroll through the historical record screens as shown

below.

4. To return to the periodic record and current session screens, press B

again.

5. After you are finished viewing data, press D to exit the Data Recall Mode.

C

Use the following procedure when you want to clear the contents of the
historical record and restart all values from zero.

1. In the Data Recall Mode, press B to display

the high altitude data (

MAX

) of the historical

record.

2. Hold down E.

•

CLR

 will appear in the upper part of the

display.

3. Keep E held down for an additional two

seconds until 

CLR

 starts flashing.

• The historical record high altitude screen will

reappear when data deletion is complete.

• If you release the E button part way through

the above procedure, the watch will return to
the historical record high altitude screen
without deleting the data.

World Time displays the current time in 30 cities
(29 time zones) around the world.

• If the current time shown for a city is wrong,

check your Home City time settings and make
the necessary changes.

• For full information on city codes, see the “City

Code Table”.

• All of the operations in this section are

performed in the World Time Mode, which you
enter by pressing D.

In the World Time Mode, use A (east) and C
(west) to scroll through city codes (time zones).

• When the currently selected time zone is one

that includes mostly ocean, a value indicating
the zone’s Greenwich Mean Time differential
appears in place of a city code.

Timekeeping
Mode time

Current time in the zone
of the selected city code

City code

1. In the World Time Mode, use A (east) and C

(west) to display the city code (time zone)
whose Standard Time/Daylight Saving Time
setting you want to change.

2. Hold down E to toggle between Daylight

Saving Time (DST indicator displayed) and
Standard Time (DST indicator not displayed).

• The DST indicator appears on the display

whenever you display a city code for which
Daylight Saving Time is turned on.

• You cannot toggle between Daylight Saving Time and Standard Time if the

displayed city code is 

GMT

.

• Note that the DST/Standard Time setting affects only the currently

displayed city code. Other city codes are not affected.

DST indicator

The stopwatch lets you measure elapsed time,
split times, and two finishes.

• The display range of the stopwatch is 23 hours,

59 minutes, 59.99 seconds.

• The stopwatch continues to run, restarting from

zero after it reaches its limit, until you stop it.

• The stopwatch measurement operation

continues even if you exit the Stopwatch Mode.

• Exiting the Stopwatch Mode while a split time is

frozen on the display clears the split time and
returns to elapsed time measurement.

• All of the operations in this section are

performed in the Stopwatch Mode, which you
enter by pressing D.

Minutes

Current time

1/100 second

Hours

Seconds

J

J

J

J

J

J

J

J

J

J

J

First runner
finishes.
Display time
of first runner.

J

A

A

A

A

C

A

C

C

A

C

A

C

A

C

C

Display time of
second runner.

Second runner
finishes.

(SPL displayed)

You can set the countdown timer within a range
of one minute to 24 hours. An alarm sounds
when the countdown reaches zero.

• All of the operations in this section are

performed in the Countdown Timer Mode,
which you enter by pressing D.

1. While the countdown start time is on the

display in the Countdown Timer Mode, hold
down E until the hour setting of the
countdown start time starts to flash, which
indicates the setting screen.

• If the countdown start time is not displayed,

use the procedure under “To use the
countdown timer” to display it.

Minutes

Current time

Hours

Seconds

2. Press D to move the flashing between the hour and minute settings.
3. Use A (+) and C (–) to change the flashing item.

• To set the starting value of the countdown time to 24 hours, set

 OO

’

OO

.

4. Press E to exit the setting screen.

Press A while in the Countdown Timer Mode to start the countdown timer.

• When the end of the countdown is reached, the alarm sounds for five

seconds or until you stop it by pressing any button. The countdown time is
reset to its starting value automatically when the alarm sounds.

• Press A while a countdown operation is in progress to pause it. Press A

again to resume the countdown.

• To stop a countdown operation completely, first pause it (by pressing A)

and then press C. This returns the countdown time to its starting value.

You can set five independent daily alarms. When
an alarm is turned on, the alarm tone sounds
when the alarm time is reached.
You can also turn on an Hourly Time Signal,
which will cause the watch to beep twice every
hour on the hour.

• The alarm number (ALM-1 through ALM-5)

indicates an alarm screen. SIG is shown when
the Hourly Time Signal screen is on the display.

• When you enter the Alarm Mode, the data you

were viewing when you last exited the mode
appears first.

• All of the operations in this section are

performed in the Alarm Mode, which you enter
by pressing D.

Alarm time
(Hour : Minutes)

Alarm number

Current time