John Deere AC1-5E Manual De Usuario

Hand Carry Electric Air Compressor Manual

EXPLODED VIEW & EXPLANATION OF AIR COMPRESSOR FEATURES

AIR TANK PRESSURE GAUGE: The air tank pressure gauge indicates

the reserve air pressure in the air tank (s).

OUTLET PRESSURE GAUGE: The outlet pressure gauge indicates the

air pressure available at the outlet side of the regulator. This pressure

is controlled by the regulator and is always less or equal to the air tank

pressure.
PRESSURE REGULATOR: The air pressure coming from the air tank is

controlled by the regulator knob. Turn the pressure regulation knob clock-

wise to increase discharge pressure, and counterclockwise to decrease

discharge pressure.

MOTOR THERMAL OVERLOAD: The electric motor has a manual ther-

mal overload protector. If the motor overheats for any reason, the thermal

overload will cut off power to prevent the motor from being damaged. Wait

until the motor is cool before pressing the thermal overload button to reset

and begin working again.

MOTOR/PRESSURE SWITCH: This switch is used to start or stop the air

compressor. Pull the switch up to the "ON" position will provide automatic

power to the pressure switch which will allow the motor to start when the

air tank pressure is below the factory set "cut-in" pressure. When the air

tank pressure reaches the factory set "cut-out" pressure, the pressure switch

stops the motor. For safety purposes, this switch also has a pressure release

valve located in the switch designed to automatically release compressed

air from the air compressor pump head and its discharge line when the air

compressor reaches "cut-out" pressure or is shut off. This allows the motor

to restart freely. Push the switch down to the "OFF" position will remove

power from the pressure switch and stop the air compressor.

AIR INTAKE FILTER: This ﬁlter is designed to clean air coming into the

pump. To ensure the pump continually receives a clean, cool, dry air

supply this ﬁlter must always be clean and ventilation opening free from

obstructions. The ﬁlter element can be removed and cleaned by using

warm, soapy water. Rinse the ﬁlter element and air dry. Replace ﬁlter

element when necessary.

CHECK VALVE: This valve prevents the air tank pressure from ﬂowing

back into the air compressor head. To inspect the check valve, relieve

all pressure in the tank, remove the valve plug and clean or replace the

valve disc.