Garmin 190-01674-00_0B Manual De Propietario

Complete one or more actions to enter your jump 

information:
• Select DIP to set a waypoint for the desired landing 

location.

• Select Drop Alt to set the drop altitude AGL (in feet) 

when the jumpmaster exits the aircraft.

• Select Open Alt to set the open altitude AGL (in feet) 

when the jumpmaster opens the parachute.

• Select FWD Throw to set the horizontal distance traveled 

(in meters) due to aircraft speed.

• Select Crs to HARP to set the direction traveled (in 

degrees) due to aircraft speed.

• Select Wind to set the wind speed (in knots) and direction 

(in degrees).

• Select Constant to fine-tune some information for the 

planned jump. Depending on the jump type, you can 

select Percent Max, Safety Fctr, K-Open, K-Freefall, or 

K-Static and enter additional information (

).

• Select Auto to DIP to enable navigation to the DIP 

automatically after you jump.

• Select GOTO HARP to start navigation to the HARP.

Select the action key.

Select Jumpmaster.

).

Select Wind > Add.

Select an altitude.

Enter a wind speed in knots and select Done.

Enter a wind direction in degrees and select Done.
The wind value is added to the list. Only wind values 

included in the list are used in calculations.

Repeat steps 5–7 for each available altitude.

Select the action key.

Select Jumpmaster.

Select HAHO or HALO.

Select Wind > Reset.

All wind values are removed from the list.

Select the action key.

Select Jumpmaster > Static > Wind.

Enter a wind speed in knots and select Done.

Enter a wind direction in degrees and select Done.

Select Jumpmaster, select a jump type, and select Constant.
Percent Max: Sets the jump range for all jump types. A setting 

less than 100% decreases the drift distance to the DIP, and 

a setting greater than 100% increases the drift distance. 

More experienced jumpmasters may want to use smaller 

numbers, and less experienced skydivers may want to use 

larger numbers.

Safety Fctr: Sets the margin of error for a jump (HAHO only). 

Safety factors are usually integer values of two or greater, 

and are determined by the jumpmaster based on 

specifications for the jump.

K-Freefall: Sets the wind drag value for a parachute during 

freefall, based on the parachute canopy rating (HALO only). 

Each parachute should be labeled with a K value.

K-Open: Sets the wind drag value for an open parachute, 

based on the parachute canopy rating (HAHO and HALO). 

Each parachute should be labeled with a K value.

K-Static: Sets the wind drag value for a parachute during a 

static jump, based on the parachute canopy rating (Static 

only). Each parachute should be labeled with a K value.

The VIRB remote function allows you to control your VIRB 

action camera from a distance. Go to 

 to 

purchase a VIRB action camera.

Before you can use the VIRB remote function on your device, 

you must enable the remote setting on your VIRB camera. See 

the owner's manual for your VIRB camera for more information.

Turn on your VIRB camera.

From your device, select the action key, and select VIRB 

Remote.

Wait while the device connects to your VIRB camera.

Select an option:
• To record video, select  .
• To stop recording video, select  .
• To take a photo, select the action key.

Select the action key.

Select Clock > Alarm Clock > Add Alarm.

Select the action key,  , and   to set the time.

Select Tone, Vibration, or Tone & Vib..

Select Once, Daily, or Weekdays.

Select the action key.

Select Clock > Timer.

Select the action key,  , and   to set the time.

If necessary, select Notification, and select a type of 

notification.

Select Start.

Select the action key.

Select Clock > Stopwatch.

Select Start.

Select the action key.

Select Clock > Alt. Zones > Add Zone.

Select a time zone.

The custom time zone page is added to the current profile.

Select the action key.

Select Clock > Alt. Zones.

Select a time zone.

Select an option:
• To change the time zone, select Edit Zone.
• To customize the name of the time zone, select Edit 

Label.

• To delete the time zone from the quick page loop, select 

Delete > Yes.

8

Applications