Samsung SCX5639FR Manual De Usuario

Descargar
Página de 351
Regulatory information
154
5. Appendix
25 
Regulatory compliance statements
Wireless guidance
Low power, Radio LAN  devices (radio frequency (RF) wireless 
communication devices), operating in the 2.4 GHz/5 GHz Band, may 
be present (embedded) in your printer system. The following section 
is a general overview of considerations while operating a wireless 
device.
Additional limitations, cautions, and concerns for specific countries 
are listed in the specific country sections (or country group sections). 
The wireless devices in your system are only qualified for use in the 
countries identified by the Radio Approval Marks on the system 
rating label. If the country you will be using the wireless device in, is 
not listed, contact your local Radio Approval agency for 
requirements. Wireless devices are closely regulated and use may 
not be allowed.
The power output of the wireless device or devices that may be 
embedded in your printer is well below the RF exposure limits as 
known at this time. Because the wireless devices (which may be 
embedded into your printer) emit less energy than is allowed in 
radio frequency safety standards and recommendations, 
manufacturer believes these devices are safe for use. Regardless of 
the power levels, care should be taken to minimize human contact 
during normal operation.
As a general guideline, a separation of 20 cm (8 inches) between the 
wireless device and the body, for use of a wireless device near the 
body (this does not include extremities) is typical. This device should 
be used more than 20 cm (8 inches) from the body when wireless 
devices are on and transmitting.
This transmitter must not be collocated or operation in conjunction 
with any other antenna or transmitter.
Some circumstances require restrictions on wireless devices. 
Examples of common restrictions are listed below:
Radio frequency wireless communication can interfere with 
equipment on commercial aircraft. Current aviation 
regulations require wireless devices to be turned off while 
traveling in an airplane. IEEE 802.11 (also known as wireless 
Ethernet) and Bluetooth communication devices are 
examples of devices that provide wireless communication.
In environments where the risk of interference to other 
devices or services is harmful or perceived as harmful, the 
option to use a wireless device may be restricted or 
eliminated. Airports, Hospitals, and Oxygen or flammable gas 
laden atmospheres are limited examples where use of 
wireless devices may be restricted or eliminated. When in 
environments where you are uncertain of the sanction to use 
wireless devices, ask the applicable authority for 
authorization prior to use or turning on the wireless device.