Samsung 07202010 Manual De Usuario

95

Important!: Note: The Bluetooth feature must first be disabled before initiating a USB connection with the phone. Prior to connecting the 

USB cable to the phone, install the latest version of the PC Studio application. This application installs the necessary USB 

drivers onto your machine.

In Idle mode, press Menu 

➔ 

Settings 

➔ 

Phone settings 

➔ 

USB mode and press the Select soft key or 

.

Select one of the following USB modes:
• Samsung PC studio: sets PC Studio to launch as the default application when a USB connection is detected.
• Ask on connection: requires the phone to display a message which requires you to assign a default USB application.
• Mass storage: allows you to utilize the onboard storage capacity of the phone to store and upload files. This option allows your 

computer to detect the phone as a removable storage drive.

When the Lock phone feature is enabled, the phone is locked and you must enter the 4- to 8-digit phone password 
each time the phone is switched on.
Once the correct password is entered, you can use the phone until you switch it off.

䊳

In Idle mode, press Menu 

➔ 

Settings 

➔ 

Phone settings  

➔ 

Security  

➔

 Lock phone and press the Select soft key 

or .

The following options are available:

–

Disable: you are not asked to enter the phone password when you switch on the phone.

–

Enable: you are required to enter the phone password when you switch on the phone.

–

When the Lock SIM feature is enabled, the phone will only work with the current S M card. This is done by selecting 

 or 

 in 

the 

 menu.

When the Check PIN code feature is enabled, you must enter your PIN each time you switch on the phone. 
Consequently, any person who does not have your PIN cannot use your phone without your approval.

Note: Before enabling or disabling the PIN Check feature, you must enter your PIN.