Siemens 3000 Classic Manual De Usuario
19
Gigaset 3000 Classic, IM1-En, A31008-G3000-B001-2-6Z19 3000Cla.fm
05.01.00
Changing the base station
Prerequisite: the handset is registered with more than one
base station.
base station.
You can choose one of the following settings:
• Set the handset to automatically select (factory setting)
the best base (factory setting).
• Set the handset to priority base station – the handset
searches for other base stations if this is not found within
30 seconds.
30 seconds.
• Set the handset to a fixed base station.
z {
Press the set key followed by the INT key.
e.g.
¸¸ For example, set base 1 as the priority base.
For automatic selection: enter
¨
.
For priority base: enter the base number
twice.
twice.
For fixed base: enter the base number
once.
once.
b
Save the setting and terminate the function.
Switching to tone dialling
If you are operating the base station in a telephone system
that uses pulse dialling (DP), you can switch to tone dialling
(DTMF), e.g. for telephone banking, to check an external
answering machine, etc.
that uses pulse dialling (DP), you can switch to tone dialling
(DTMF), e.g. for telephone banking, to check an external
answering machine, etc.
Prerequisite: a connection is active.
z
Press the set key.
~
Activate tone dialling – tone dialling is active
until the call is cleared down.
until the call is cleared down.
3000Cla-IM1-2-en.bk Seite 19 Mittwoch, 5. Januar 2000 3:31 15