Furuno FS-1570 (150W) Manual De Usuario
5 CALLING, RECEIVING
5-17
CALL TYPE
: GROUP CALL
COM. FREQ
: 2164.0 KHZ
COM. TYPE
: TELEPHONE
PRIORITY
: ROUTINE
GROUP ID
:
012345678
DSC FREQ
: 2M-INTL
GO TO ALL VIEW
**
Compose message
**
13. Press the [CALL] key to send the group call (transmission time: about seven seconds).
The display shows "Group call in progress!" while the call is being sent.
GROUP ID
:
012345678
Group
call in progress!
call in progress!
TIME TO GO
:
6S
DSC FREQ
:
2177.0 KHZ
TELEPHONE
ROUTINE
2164.0 KHZ
14. The radiotelephone screen automatically appears after the call is sent, if frequency was
specified.
15. If you selected TELEPHONE at step 7, communicate by radiotelephone. For NBDP, do
the following:
Sending message by NBDP Terminal Unit
1. The message “STATION ENTRY COMPLETED FROM DSC. Press any key to escape.”
appears on the NBDP’s display. Press any key on the NBDP Terminal Unit to erase the
message.
message.
2. Press the function key [F3] on the keyboard of the NBDP Terminal Unit to show the
Operate menu.
3. Choose “Call Station” and then press the [Enter] key.
4. “DSC” is selected; press the [Enter] key. “Connect” appears in reverse video.
5. Type and transmit your message.
6. When you have finished sending your message, press the [F10] key to disconnect the
4. “DSC” is selected; press the [Enter] key. “Connect” appears in reverse video.
5. Type and transmit your message.
6. When you have finished sending your message, press the [F10] key to disconnect the
line.