Furuno FS-5070 Manual De Usuario

10. NBDP TRANSMITTING, RECEIVING 

The communication buffer is a temporary memory which stores transmit and receive 
messages. To display the contents of the communication buffer, do the following: 
 
1.  Escape from the message creation screen. 
2. Press the ↓ key while pressing the Fn key or the ↑ key pressing the Fn key. The contents 

of the communication buffer are displayed. 

 
To print them, press the Ctrl and P keys simultaneously. To erase the contents from the 
screen, press the ↓ key at the bottom line. 
 
To erase the contents of the buffer, press the F1 and 9 keys. 
 

This section shows you how to communicate with a coast station which handles automatic 
telex transmission, using macrofiles. You will also need to register communication channels 
and stations, and prepare macrofiles. 
 
Coast stations using automatic telex are MCI Marine Services (North America), Sydney 
Radio (Australia), Lyngby Radio (Denmark), and others. The procedure is mostly common 
to all coast stations, however refer to the coast station’s traffic manual for details. 

STORE-AND-
FORWARD

DIRECT
DIALING

MULTI-
ADDRESS

INTERNATIONAL
TELEX NETWORK

CENTRAL
SYSTEM

SYSTEM
CONTROL

SUB-STATION

SHIP

The service available in automatic telex are 
Message transfer between ship and coast station (store-and-forward) 
Connection with landline telex (direct dialing) 
Multi address.