Furuno FS-5070 Manual De Usuario

2. SSB RADIOTELEPHONE 

Choose the channel or transmitting frequency to use for the SSB. This setting can be done 
both when the handset is on and off hook. 
 
Note: To set the SSB radiotelephone to 2182 kHz/J3E, press the RT/CH key more than five 

seconds. 

 
Choosing channel 

1. Rotate the ENTER knob to choose CH and then push the ENTER knob. 

You can show the channel window by pushing also 1/CH key. 

SSB  SIMP  HIGH  FAST  NB  SQ

 

SEN

S

IA

10.0A

MMSI xxxxxxxxx

  35 00.0000N 

135 00.0000E

CH:

200

Tx: 2182.0   kHz

Rx: 2182.00 kHz

UTC 00:00

EPFS 23:59

 

200

POS

 

2.  Channel can be entered directly with the numeric keys, or by using the ENTER knob. 

See below for details. 

Entering band and band channel with the numeric keys: Use the numeric keys to 
enter band and band channel and then push the ENTER knob. 

Choosing band and band channel with the ENTER knob: 
After showing the window, use the FILE/CURSOR key to place the cursor in the band or 
band channel position, whichever you want to change. 

 

 

200

 

 

200

Cursor position for

Cursor position for

selection of band

selection of band channel

 

3. Rotate the ENTER knob to set band (or channel) desired. 

2    4    6    8    12    16    18    22    25    01   02-----    029

ITU band

User band

 

Setting Range
ITU  Band:

2/4/6/8/12/16/18/22/25

User Band:

001-029 (First zero is necessary)

ITU Channel:

XX01 - XX236 (rendering on band or mode)

User Channel: XXX01 - XXX99

 

4. Push the ENTER knob. The Tx and Rx frequencies of the channel entered appear.