KYOCERA 2001832 Manual De Usuario

䊳

Press and hold 

 for approximately two 

seconds.

Once your device is on and finds a signal, it 
automatically enters standby mode – the device’s idle 
state. At this point, you are ready to begin making and 
receiving calls.

If your device is unable to find a signal after five 
minutes of searching, a Power Save feature is activated 
and your device searches for a signal periodically 
without your intervention. When a signal is found, your 
device automatically returns to standby mode.

1.

Press and hold 

 until you see the 



Phone options

 window.

2.

Tap 

Power off > OK

 to turn the device off.

To save your battery or prevent accidental touches, 
your device automatically turns off the display screen 
and lock the screen after the time specified for the 
screen timeout. (See “Changing the Backlight Time 
Length” on page 51 for details.)

To unlock the display screen:

1.

Press 

 to wake up the screen.

2.

From the lock screen, flick 

. 

To lock the display screen manually:

䊳

Press 

. (Once your backlight turns off, your 

device locks.)

䡲

To wake up the screen, just press 

 again.

The Power Save feature conserves your battery power 
when you are in an area where there is no signal.

During a call, the screen will automatically turn off when 
no operation is performed for about 15 seconds 
(regardless of the screen timeout setting).

If you’ve locked your screen, you must draw an unlock 
pattern or enter a PIN or password to unlock it. See 
“Setting the Screen Lock” on page 59.