Polycom E340 Manual De Usuario
SpectraLink Corporation
Configuration and Administration–NetLink e340/h340/ i640 Wireless Telephone
NetLink Telephony Gateway and SpectraLink Radio Protocol
PN: 72-1065-09-J.doc
Page 34
6.3 Syslog Mode
A syslog server must be present on the network in order for the handset to send the
log messages and have them saved. The syslog server will be found with DHCP
option 7 if the handset is using DHCP. If static addresses are configured, the syslog
server’s IP address can be configured statically in the Admin menu.
log messages and have them saved. The syslog server will be found with DHCP
option 7 if the handset is using DHCP. If static addresses are configured, the syslog
server’s IP address can be configured statically in the Admin menu.
If the syslog server address is blank (000.000.000.000 or 255.255.255.255)
or the handset is using DHCP and no option 7 is received from the
DHCP server, the handset will not send any syslog messages.
or the handset is using DHCP and no option 7 is received from the
DHCP server, the handset will not send any syslog messages.
Admin menu options:
•
*Disabled
turns syslog off.
•
Errors
causes the handset to log only events that we consider to be an error (see
below).
•
Events
logs all errors plus also some other interesting events (see below).
•
Full
logs all the above plus a running stream of other quality information (see
below).
The table below lists the syslog messages and which level of logging will produce
them:
them:
Message type
Errors
Events
Full
Failed Handoff
Yes
Yes
Yes
Successful Handoff
No
Yes
Yes
Security Error
Yes
Yes
Yes
Call Start/End
No
Yes
Yes
Audio stats
No
No
Yes (every 5 secs)
Audio error threshold exceeded
Yes
Yes
Yes
Radio stats
No
No
Yes (every 5 secs)
Radio error threshold exceeded
Yes
Yes
Yes
All syslog messages will include:
• Date and time (to 1/100th of second) since handset power on (currently set to
Jan-1 00:00.00)
• Handset’s MAC address
• Handset’s IP address
• Handset’s IP address
• Sequence number
The table below lists the additional items in each Message type:
The table below lists the additional items in each Message type:
Failed Handoff
(Sent whenever the handset attempted to handoff, but
failed trying.)
Failed AP MAC
Failed AP signal strength
Current AP MAC
Current AP signal strength
Failure reason