Philips SE171 Manual De Usuario

13

Français

EN

Install the handset

Caution

Risk of explosion! Keep batteries away from 

 

•

heat, sunshine or fire. Never discard batteries

in fire.

Use only the supplied batteries.

 

•

Risk of decreased battery life! Never mix 

 

•

different brands or types of batteries.

Note

Charge the batteries for 8 hours before first

 

•

use.

Warning

Check the battery polarity when inserting in 

 

•

the battery compartment. Incorrect polarity 

may damage the product.

1

  The batteries are pre-installed in the 

handset. Pull the battery tape off from 

the battery door before charging.

 

2

  Place the handset on the base station to 

charge the handset. When the handset is 

placed correctly on the base station, your 

hear a docking sound.

The handset starts charging.

 

»

Note

If the handset becomes warm when the 

 

•

batteries are being charged, it is normal.

Check the battery level

  

The battery icon displays the current battery 

level.

 
 

When the handset is off the base 

station/charger, the bars indicate 

the battery level (full, medium 

and low).

When the handset is on the base 

station/charger, the bars keep 

scrolling until charging completes.
The empty battery icon flashes.

The battery is low and needs 

recharging.

The handset turns off if the batteries are empty. 

If you are on the phone, you hear warning 

tones when the batteries are almost empty. The 

call gets disconnected after the warning.