Star Trac NXT 7000 Manual De Usuario

Descargar
Página de 9
Page 1 of 9Star Trac Product Support    800-503-1221 
 
Page 1 of 9 
 
Installation Instructions
 
AS SETUP
 
 
SPIN BIKE ASSEMBLY AND SETUP 
Use the following procedures to unpack and assemble your STAR TRAC SPINNER ® BIKE
 
Prepare the area that you will be unpacking and assembling the bike to be free from debris that may cause 
damage.  Observe all safety precautions and care while unpacking and assembling the bike. 
 
UNPACKING 
Open the shipping carton, carefully remove all parts from the shipping carton and foam inserts, inspect all 
packaging material for parts or screws and verify that the following parts are included in your shipment: 
 
NXT Parts List 
Description 
Qty. 
Description 
Qty. 
Handlebar Post 
M10x1.5, 55mm Button Head Screw 
Handlebar 
M10x1.5, 65mm Button Head Screw 
M8x1.25, 16mm Flat Head Screw 
M10x1.5 Nyloc Hex Nut 
M8x1.25, 16mm Socket Set Screw 
10mm Washer, Flat 
16 
Seat Post 
Wrench Hex, 5mm 
Seat Slider Assy, with Saddle 
Wrench Hex, 4mm 
Pedal set 
1 set 
Multi Wrench 
Front Leg Assy. With Transport Wheels 
Spare Parts Kit (USA Only) 
1 Kit 
Rear Leg Assy. 
 
 
 
Pro/Elite Parts List 
Description 
Qty. 
Description 
Qty. 
Handlebar Assy. 
M10x1.5, 55mm Flat Head Screw 
Seat Post 
M10x1.5 Nut 
Seat Slider Assy, with Saddle 
10mm Washer, Flat 
Pedal Set 
1 set 
Wrench Hex, 5mm 
Front Leg Assy. With Transport Wheels 
Wrench Hex, 4mm 
Rear Leg Assy. 
Multi Wrench 
 
 
Spare Parts Kit (USA Only) 
1 Kit 
Spare Parts Kit- Save the box of spare parts in a safe place so you have service parts when needed in the 
future.  The spare parts kit contains a spare saddle, brake pad and pedals straps. These items are not included 
in the parts warranty. 
 
NOTE: If you are missing any of the parts listed above, inspect the packing material and the box for items that 
may have been overlooked. 
 
If parts are missing, or if you have any product questions, please call Star 
Trac’s Service Department at (800) 503-1221, please have your Spinner
 
serial number ready. 
 
CAUTION
: Damage to the bike during assembly is not covered as part of the 
limited Star Trac warranty.   Take care not to drop or lean the bike on the 
handle bar pop pin.   Carefully stand the bike up in the normal upright position 
on a stable surface so it will not tip over during assembly.