TOA Electronics WM-4310H Manual De Usuario

7

Microphone Element

Electret condenser type, cardioid pattern

Emission

F3E

Frequency Range 

690 – 865 MHz, UHF

Selectable Channel 

16 channels

RF Carrier Power

Less than 50 mW

Tone Frequency

32.768 kHz

Modulation System

PLL synthesizer

Maximum Input Level

120 dB SPL

Battery 

6LR61 (9 V x 1)

Battery Life 

10 hours (alkaline)

Indicator

Power/Battery lamp (common use)

Antenna 1/4 

λ

herical type 

Operating Temperature

–10 to +50°C

Finish

Resin, coating, dark gray

Dimensions

62 (w) x 142 (h) x 32 (d) mm

Weight 

150 g (with battery)

Note: The design and specifications are subject to change without notice for improvement. 

• Accessories
Screwdriver (for setting)  .................................... 1
Channel identification seal  ................................ 1
Storage case  ..................................................... 1

Operation is subject to the following two conditions: 
(1) This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.

Step 4. Adjust the corresponding tuner's volume control so that its knob points to the 2 o'clock position. If the

tuner's AF PEAK indicator remains lit, readjust the microphone's audio level control to the position
that causes the indicator to flash when the tuner output level reaches its peak. The AF PEAK indicator
lights when the output level reaches the point of about 3 dB below the clipping level.

The AF PEAK indicator operates in response to the volume control position. 
However, the AF LEVEL indicator (on the WT-4810) indicates the level regardless of the volume
control setting.  

Step 5. Replace the battery cover.