Samsung SCX-5312F Manual De Usuario
C
OPYING
4.10
Duplex Copy
Duplex copy allows you to print on both sides of the paper.
Duplex copy is available only when you load documents in the
ADF.
Duplex copy is available only when you load documents in the
ADF.
Before printing in the duplex mode, decide on which edge you
will bind your finished document. The binding options are:
LONG EDGE, which is the conventional layout used in book
binding.
SHORT EDGE, which is the type often used with calendars.
will bind your finished document. The binding options are:
LONG EDGE, which is the conventional layout used in book
binding.
SHORT EDGE, which is the type often used with calendars.
1
Load the documents to be copied in the ADF.
Make sure that the original document is single sided.
Make sure that the original document is single sided.
2
Make sure that you have selected the required paper tray.
See page 4.2.
See page 4.2.
3
Press Duplex Copy. The current setting appears on the
bottom line of the display.
bottom line of the display.
4
Press Duplex Copy or use the navigation buttons to select
the binding orientation. If you select “OFF”, you cannot use
duplex copying.
the binding orientation. If you select “OFF”, you cannot use
duplex copying.
5
Press Mode/Enter (Enter on SCX-5112) to save the
selection.
selection.
6
If necessary, customise the copy settings incluing the
number of copies, copy size, contrast and image type using
the control panel buttons. See “Setting Copy Options” on
page 4.6.
number of copies, copy size, contrast and image type using
the control panel buttons. See “Setting Copy Options” on
page 4.6.
N
OTE
:
In the duplex copy mode, PHOTO or HIGH QUALITY setting
by using the Image button is not enabled.
7
Press Copy/Start to begin copying.
8
When the copying is completed, press Stop/Clear to
cancel the duplex copy mode.
cancel the duplex copy mode.
Long Edge
Short Edge