Coleman 9163-150 Manual De Usuario

Connect Frame to Tent

–Start with the center Grey main pole.

Insert the pin into the end of the grey 
main tent pole at tent’s edge. (illus. 3 & 4)

–Go to opposite end of pole and 

gradually apply pressure to the pole 
forming an arch until you are able to 
insert the pin into the opposite pole end.

–Repeat for two black main poles.

Lakeside

™

15’x10’ 

1

Layout & Positioning 
of Tent, Pole Assembly

–Layout and position tent with door 

facing desired direction. (illus. 1)

–Unzip doors.
–Stake down tent corners only, using the

stake loops. Keep the floor taut.
(Intermediate loops will be staked later.)

–Assemble frame poles by interlocking 

shock-corded poles. (three poles)

–Insert the grey pole straight through the 

center pole sleeves in the middle of tent.

Then insert black poles straight through 

outside pole sleeves. (illus. 1)

2

–Select a level campsite clear of 

rocks, branches and other hard or 
sharp objects.

–Do not set up your tent under trees.
–For best results in windy conditions, 

position the end of tent into the wind.

–See owners manual for more tips.

Assembled
Black main
poles
inserted
through 
pole sleeves

Grey main pole
through center
sleeves

Instructions apply to Part Number 9163-150

illus. 1

illus. 2 

Tent stake 

through 

stake loop

illus. 4
Tent frame set-up

Part No. 9163-503

Part No. 9163-505

Part No. 9163-504

illus.3
Insert pin 
into pole end

Part No. 9163-502

Grey Pole

Black Pole

Black Pole