Coleman 9271L133 Manual De Usuario

Layout & Positioning 
of Tent, Pole Assembly

– Layout and position tent with doors

facing desired direction. (illus. 1)

– Stake down tent corners, 

using the tent stake loops. 
Keep the floor taut. (illus. 2)

– Assemble all poles by interlocking 

shock-corded poles. 

– Insert the longer Center Frame Poles into 

Center Pole Sleeves. The poles should cross
forming an “X” in the middle of tent. (illus. 1)

– Insert the shorter Side Frame Poles through the pole

sleeves located at the sides of tent. (illus. 1)

Connect Frame to Tent

– Unzip doors.
– Locate the Pin & Ring Systems on

either side of the front doors and the
corresponding Pin & Ring on the 
back side of tent.

– Insert one end of Frame Pole onto 

Pin & Ring System on tent stake loop
on either side of the doors. (illus. 3)

– Go to opposite end of pole diagonally

from starting point and gradually 
apply pressure to the pole forming
an arch until you are able to insert 
the Pin into pole end.

– Repeat for second pole.
– Attach tent frame clips to poles.

13’x13’ Ridgeview

1

2

– Select a level campsite clear of 

rocks, branches and other hard or 
sharp objects. 

– Do not set up your tent under trees. 
– For best results in windy conditions,

position the end of tent into the wind.

Door

Door

Instructions apply to Part Number 9271L133

illus. 1

illus. 2 

Tent

stake through

stake loop

illus. 4

Center section upright

Part No. 9270L102

Part No. 9271L105

Part No. 9270L103

illus. 3

Ring & Pin System 

Center poles

Side pole

Side pole

Center poles

Sidepole

Sidepole