Agilent Technologies E6380-90073 Manual De Usuario
Chapter 1
79
GPIB Command Dictionary
AFG2|ENCoder subsystem
:AMPS|TACS:FILLer:DATA1 <string>
:AMPS|TACS:FILLer:DATA2 <string>
:AMPS|TACS:FILLer:DATA1?
:AMPS|TACS:FILLer:DATA2?
:AMPS|TACS:FILLer:DATA2 <string>
:AMPS|TACS:FILLer:DATA1?
:AMPS|TACS:FILLer:DATA2?
These commands set/query FOCC filler data. Each filler contains 7
hexadecimal characters representing the 2 type bits and 26 information
bits of the control filler/message word. The control filler is sent
continuously when the :AMPS|TACS:FILL:SEND command is used or
after a control message has been sent using :AMPS|TACS:SEND.
hexadecimal characters representing the 2 type bits and 26 information
bits of the control filler/message word. The control filler is sent
continuously when the :AMPS|TACS:FILL:SEND command is used or
after a control message has been sent using :AMPS|TACS:SEND.
Both filler fields must be full (seven digits) for the forward control
channel information to be structured correctly. Do not leave any blank
spaces.
channel information to be structured correctly. Do not leave any blank
spaces.
To use this command, AFG2:AMPS:CHAN must be set to ‘Cntl’.
Syntax
AFG2:AMPS:FILL:DATA1 <string>
AFG2:AMPS:FILL:DATA2 <string>
AFG2:AMPS:FILL:DATA1?
AFG2:AMPS:FILL:DATA2?
Screen/field equivalent
AFG2:AMPS:FILL:DATA1 and DATA 2 control the
Filler
fields for
Stream A and Stream B on the SIGNALING ENCODER screen when
the
the
Mode
field is set to
AMPS-TACS
and the
Channel
field is set to
Cntl
.
:AMPS|TACS:FILLer:SEND
This command sends the filler information that is entered with the
AFG2:FILL:DATA1 and AFG2:FILL:DATA2 commands.
AFG2:FILL:DATA1 and AFG2:FILL:DATA2 commands.
To use this command, AFG2:AMPS:CHAN must be set to ‘Cntl’.
Syntax
AFG2:AMPS:FILL:SEND
Screen/field equivalent
AFG2:AMPS:FILL:SEND controls the
Send Filler
field on the
SIGNALING ENCODER screen when the
Mode
field is set to
AMPS-TACS
and the
Channel
field is set to
Cntl
.