Samsung SDR5100 Manual De Usuario

 

main menu

main menu

5.  When the backup setup is done, press <OK>.

 `

If no available device is recognized for backup, <OK> button is not activated.

 `

The application may slow down during the backup.

 `

You can switch to the menu screen during the backup in operation, but playback of data is not available.

 `

When a memory device is used for backup, it is not available to use the full capacity of the media because the 

system consumes a portion of its capacity.

 `

Pressing the <Exit> during the backup will return to the previous menu, while the backup progresses.

neTWORK COnFiGuRaTiOn

It provides networked monitoring of Live screen from a remote place, and supports mail forwarding function with 

events. You can configure the network environment which enables such functions.

Connection mode

You can set the network connection route and protocol.

Setting the Connection

Sets the protocol and environment of the network.

Using the mouse may help make setup easier.

1.  Press the [menu] button on the remote control.
2.  Use the left/right button (_ +) to select <network>.

Network menu is selected.

3.  Use the up/down buttons ($%) to move to <Connection 

mode>, and press [enTeR] button.

4.  Select <Connection>.

A window of connection mode setup appears.

5.  Use direction buttons ($%_ +) to move to a desired 

item, and set the value.

Connection Mode : Sets the network connection mode.

Bandwidth : Sets the maximum data flow to be transferred.

(Upload speed)

Options will vary depending on the selected connection 

mode.

 - For <Static iP>, <Dynamic iP> : Select one from 

50 kbps ~ 2Mbps, and Unlimited.

 - For <aDSL>, select one from 50 kbps ~ 600 kbps.

Logout 

Return



 Connection Mode 

Static IP



 Bandwidth 

2Mbps

 OK 

Cancel



 IP 

192.168.1.200



 Gateway 

192.168.1.1



 Subnet Mask 

255.255.255.0



 DNS 

Manual

 168.126.63.1