Chicago Electric 66508 Manual De Usuario
Page 2
SKU 66508
For technical questions, please call 1-800-444-3353
SPECIFICATIONS
Electric Motor 1/3 HP
1785 RPM
Power Cord
#16 AWG X 3C, 6’4” long
Power Input
120 V~ / 60 Hz / 4.7 A (running)
Cable Type
Spring Steel with Coupler End
50’ L x ½” Cable Diameter
(0.123” Wire Diameter)
Pipe
Compatibility
For use with pipes having
2” to 4” I.D.
CAUTION: DO NOT USE THIS DRAIN
CLEANER ON DRAIN LINES SMALLER
THAN TWO INCHES. DAMAGE MAY OC-
CUR TO EQUIPMENT OR PIPES.
SAVE THIS MANUAL
You will need the manual for the safety
warnings and precautions, assembly instruc-
tions, operating and maintenance procedures,
parts list and diagram. Keep your invoice with
this manual. Write the invoice number on the
inside of the front cover. Keep the manual
and invoice in a safe and dry place for future
reference.
GENERAL SAFETY RULES
WARNING!
READ AND UNDERSTAND ALL
INSTRUCTIONS
Failure to follow all instructions listed
below may result in electric shock,
fire, and/or serious injury.
SAVE THESE INSTRUCTIONS
Work Area
Keep your work area clean and well
1.
lit. Cluttered benches and dark areas
invite accidents.
Do not operate power tools in ex-
Do not operate power tools in ex-
2.
plosive atmospheres, such as in
the presence of flammable liquids,
gases, or dust. Power tools create
sparks which may ignite the dust or
fumes.
Keep bystanders, children, and visi-
Keep bystanders, children, and visi-
3.
tors away while operating a power
tool. Distractions can cause you to
lose control. Protect others in the work
area from debris such as chips and
sparks. Provide barriers or shields as
needed.
Electrical Safety
Avoid body contact with grounded
1.
surfaces such as pipes, radiators,
ranges, and refrigerators. There is
an increased risk of electric shock if
your body is grounded.
Do not expose power tools to rain
Do not expose power tools to rain
2.
or wet conditions. Water entering
a power tool will increase the risk of
electric shock.
Grounded tools must be plugged
Grounded tools must be plugged
3.
into an outlet properly installed and
grounded in accordance with all
codes and ordinances. Never remove
the grounding prong or modify the plug
in any way. Do not use any adapter
plugs. Check with a qualified electri-
cian if you are in doubt as to whether
the outlet is properly grounded. If the
tools should electrically malfunction or
break down, grounding provides a low
resistance path to carry electricity away
from the user.
Double insulated tools are equipped
Double insulated tools are equipped
4.
with a polarized plug (one blade is
wider than the other). This plug will
fit in a polarized outlet only one way. If
the plug does not fit fully in the outlet,
reverse the plug. If it still does not fit,
contact a qualified electrician to install
a polarized outlet. Do not change the
plug in any way. Double insulation
REV 09b, 09k