Cisco Systems 4300E Manual De Usuario
3-22
Cisco Video Surveillance 4300E and 4500E High-Definition IP Camera User Guide
OL-25230-02
Chapter 3 Configuring and Managing the IP Camera
Network Setup Windows
Discovery Settings Window
The Discovery Settings window provides options for configuring the IP camera to work with Cisco
Discovery Protocol or Bonjour. These applications facilitate monitoring and management of your
network.
Discovery Protocol or Bonjour. These applications facilitate monitoring and management of your
network.
To display the Discovery window, access the configuration windows as described in the
, click Network Setup, then click Discovery.
If you change any options in this window, you must click the Save Settings button to save the changes.
If you do not click this button, changes are not retained when you exit the window. Save Settings appears
at the bottom of the window. You may need to scroll down to it.
If you do not click this button, changes are not retained when you exit the window. Save Settings appears
at the bottom of the window. You may need to scroll down to it.
describes the options in the Discovery Settings window.
NTP Server Settings Area
Note
These options do not apply if you choose the Manually Configure Time option.
Primary NTP Server
If you configured the IP camera to obtain its time from an NTP server,
identify the primary NTP server by choosing IP Address or Hostname from
the drop-down list and entering the IP address or host name in the
corresponding field.
identify the primary NTP server by choosing IP Address or Hostname from
the drop-down list and entering the IP address or host name in the
corresponding field.
Primary NTP Server
Port
Port
If you configured the IP camera to obtain its time from an NTP server, enter
the primary NTP server port number.
the primary NTP server port number.
Valid values are 123 and 1024 through 65535. The default port is 123.
Secondary NTP Server
If you configured the IP camera to obtain its time from an NTP server,
identify the secondary NTP server by choosing IP Address or Hostname
from the drop-down list and entering the IP address or host name in the
corresponding field.
identify the secondary NTP server by choosing IP Address or Hostname
from the drop-down list and entering the IP address or host name in the
corresponding field.
Secondary NTP Server
Port
Port
If you configured the IP camera to obtain its time from an NTP server, enter
the optional secondary NTP server port number.
the optional secondary NTP server port number.
Valid values are 123 and 1024 through 65535. The default port is 123.
Table 3-11
Time Settings Window Options (continued)
Option
Description
Table 3-12
Discovery Settings Window Options
Option
Description
Cisco Discovery Protocol (CDP) Area
Enable CDP
Check this check box if CDP is enabled in your network and you want the
IP camera to broadcast CDP discovery messages.
IP camera to broadcast CDP discovery messages.
Show Neighbors button Displays a new window with information about CDP-enabled device
neighbors in your network.
Bonjour Area
Enable Bonjour
Check this check box if Bonjour is enabled in your network and you want the
IP camera to broadcast Bonjour discovery messages.
IP camera to broadcast Bonjour discovery messages.