Freecom Technologies MediaPlayer Drive-In Kit Manual De Usuario
5
GB
General Information
* USB 2.0 is downwards compatible to USB 1.1. To achieve optimal performance from the
Freecom Network MediaPlayer-35 drive in kit your PC should be equipped with an USB
2.0 port. USB 2.0 PCI Host Controllers are separately available at www.freecom.com.
2.0 port. USB 2.0 PCI Host Controllers are separately available at www.freecom.com.
Minimum System Requirements
USB Requirements
• Windows 98SE, ME, 2000, XP / MAC OS X 10.1 or higher / Linux 2.4.x or higher
• Available USB 2.0, 1.1 Port (USB 2.0 recommended)*
• Available USB 2.0, 1.1 Port (USB 2.0 recommended)*
Network Requirements
• Windows 98SE, ME, 2000, XP
• Available 10/100 Ethernet LAN Port, RJ-45 (100Mbps recommended)
• LAN Cable (cross-wired or standard - see Page 28 2.1)
• Available 10/100 Ethernet LAN Port, RJ-45 (100Mbps recommended)
• LAN Cable (cross-wired or standard - see Page 28 2.1)
Hardware Requirements
• Pentium III 500MHz or faster
• At least 128 MB RAM
• USB interface (USB 1.1 or USB 2.0*)
• A CD-ROM drive or internet connection for driver installation
• For playback on TV, a TV with PAL or NTSC system is required.
• Support HDD: Compatible with standard 3.5" IDE Hard Drive
• At least 128 MB RAM
• USB interface (USB 1.1 or USB 2.0*)
• A CD-ROM drive or internet connection for driver installation
• For playback on TV, a TV with PAL or NTSC system is required.
• Support HDD: Compatible with standard 3.5" IDE Hard Drive