Philips PET717/93 Manual De Usuario
PET717_93_QSG_V2.0
Philips Portable DVD Player PET717
Quick Start Guide
1
Charge the built-in battery
Step 1 Switch the
POWER ON / OFF/CHR
slide selector to the
OFF/CHR
position.
Step 2 Connect the supplied AC adaptor to the
DC IN 12V
socket
on the DVD Player and to the AC outlet.
The red charge indicator turns on. It takes about 4 hours to fully
charge the battery.
When the battery is fully charged, the red charge indicator turns off.
When the battery is fully charged, the red charge indicator turns off.
Tip
-
-
You can only charge the batter y when the temperature is
between 0°C and 35°C.
between 0°C and 35°C.
-
When headphones are connected to the DVD Player, the fully
charged battery lasts about 2.5 hours.
charged battery lasts about 2.5 hours.
2
Install remote control battery
Step 1 Open the battery compartment.
Step 2 Insert 1 CR2025 battery with correct polarity (+/-) as indicated.
Step 3 Close the battery compartment.
Step 2 Insert 1 CR2025 battery with correct polarity (+/-) as indicated.
Step 3 Close the battery compartment.
CR2025
1
CR2025
2
3
Play discs
Step 1 Lift the display panel.
Step 2 Switch the
Step 2 Switch the
OPEN
slide selector to the right to open the disc
compartment.
• (For
• (For
the
fi rst time) Remove the protective card.
Step 3 Insert a disc with the printed side facing up.
Step 4 Push the lid down to close the disc compartment.
Step 4 Push the lid down to close the disc compartment.
Disc starts to play automatically. If not, press
OK
or 2; .
If a menu appears, select an item and then press
OK
to start play.
4
Connect a TV
On the DVD Player,
Step 1 Connect the black end of the supplied AV cable to the
Step 1 Connect the black end of the supplied AV cable to the
AV
OUT
socket.
On the TV,
Step 1 Connect the white end to the left audio input socket and the
red end to the right audio input socket.
Step 2 Connect the yellow end to the video input socket.
Step 1 Connect the white end to the left audio input socket and the
red end to the right audio input socket.
Step 2 Connect the yellow end to the video input socket.
TV
I I
VI E I
PET717_93_QSG_EN_V2.0.indd 1
PET717_93_QSG_EN_V2.0.indd 1
2010-4-28 11:12:26
2010-4-28 11:12:26