Intel DH57JG LGA-1156 mini-ITX DDR3 1333/1066 MHz 8GB BOXDH57JG Manual De Usuario
Los códigos de productos
BOXDH57JG
Product Description
15
1.5
Intel
®
H57 Express Chipset
The Intel H57 Express Chipset consisting of the Intel H57 Platform Controller Hub
(PCH) provides interfaces to the processor and the USB, SATA, LPC, audio, network,
display, Conventional PCI, and PCI Express x1 interfaces. The PCH is a centralized
controller for the board’s I/O paths.
(PCH) provides interfaces to the processor and the USB, SATA, LPC, audio, network,
display, Conventional PCI, and PCI Express x1 interfaces. The PCH is a centralized
controller for the board’s I/O paths.
For information about
Refer to
The Intel H57 Express Chipset
http://www.intel.com/products/desktop/chipsets/index.htm
Resources used by the chipset
Chapter 2
1.6
System Memory
The board has two DIMM sockets and supports the following memory features:
• Two independent memory channels with interleaved mode support
• Support for non-ECC, unbuffered, single-sided or double-sided DIMMs with x8
• Two independent memory channels with interleaved mode support
• Support for non-ECC, unbuffered, single-sided or double-sided DIMMs with x8
organization and single-sided DIMMs with x16 organization
• 8 GB maximum total system memory (with 2 Gb memory technology). Refer to
Section 2.1.1 on page 37 for information on the total amount of addressable
memory.
memory.
• Minimum total system memory: 512MB using 1 Gb x16 module
• Serial Presence Detect
• DDR3 1333 MHz and DDR3 1066 MHz SDRAM DIMMs
• Serial Presence Detect
• DDR3 1333 MHz and DDR3 1066 MHz SDRAM DIMMs
NOTE
To be fully compliant with all applicable DDR SDRAM memory specifications, the board
should be populated with DIMMs that support the Serial Presence Detect (SPD) data
structure. This allows the BIOS to read the SPD data and program the chipset to
accurately configure memory settings for optimum performance. If non-SPD memory
is installed, the BIOS will attempt to correctly configure the memory settings, but
performance and reliability may be impacted or the DIMMs may not function under the
determined frequency.
should be populated with DIMMs that support the Serial Presence Detect (SPD) data
structure. This allows the BIOS to read the SPD data and program the chipset to
accurately configure memory settings for optimum performance. If non-SPD memory
is installed, the BIOS will attempt to correctly configure the memory settings, but
performance and reliability may be impacted or the DIMMs may not function under the
determined frequency.
Table 3 lists the supported DIMM configurations.
Table 3. Supported Memory Configurations
DIMM
Capacity
Capacity
Configuration
(Note)
SDRAM
Density
Density
SDRAM Organization
Front-side/Back-side
Front-side/Back-side
Number of SDRAM
Devices
Devices
512 MB
SS
1 Gbit
1 Gb x16/empty
4
1024 MB
SS
1 Gbit
1 Gb x8/empty
8
2048 MB
DS
1 Gbit
1 Gb x8/1 Gb x8
16
2048 MB
SS
2 Gbit
2 Gb x8/empty
8
4096 MB
DS
2 Gbit
2 Gb x8/2 Gb x8
16
Note: “DS” refers to double-sided memory modules (containing two rows of SDRAM) and “SS” refers to
single-sided memory modules (containing one row of SDRAM).