JVC GR-DF570 Manual De Usuario
VIDEO PLAYBACK
24
EN
MasterPage: Left
NOTES:
● It is recommended to use the AC Adapter as
the power supply instead of the battery pack.
(
(
● To monitor the picture and sound from the
camcorder without inserting a tape or memory
card, set the camcorder’s Power Switch to “A” or
“M”, then set your TV to the appropriate input
mode.
card, set the camcorder’s Power Switch to “A” or
“M”, then set your TV to the appropriate input
mode.
● Make sure you adjust the TV sound volume to its
minimum level to avoid a sudden burst of sound
when the camcorder is turned on.
when the camcorder is turned on.
You can reproduce real three-dimensional
acoustic fields on a conventional TV, VCR, or
stereo system connected to the camcorder.
acoustic fields on a conventional TV, VCR, or
stereo system connected to the camcorder.
1
Shoot a video in Biphonic Recording mode.
2
Connect the camcorder to a TV, VCR, or
stereo system. (
3
Perform steps
4
Press BIPHONIC to change the setting.
“
A” or “
A”*: Biphonic mode is
automatically engaged when the camcorder
detects footage recorded with the Mic for
Biphonic while “AUX MIC” is set to “BIPHONIC”.
“
detects footage recorded with the Mic for
Biphonic while “AUX MIC” is set to “BIPHONIC”.
“
ON” or “
ON”*: Biphonic mode is
engaged.
No indication: Biphonic mode is disengaged.
No indication: Biphonic mode is disengaged.
* “
” appears when the camcorder detects
footage recorded while “AUX MIC” is set to “OFF”.
NOTES:
● As long as you use the Mic for Biphonic, even if
“AUX MIC” is set to “OFF” on Biphonic Recording,
you can obtain a Biphonic effect by selecting
“
you can obtain a Biphonic effect by selecting
“
ON” on the playback.
● Make sure that Biphonic mode is disengaged
when you use headphones at Biphonic playback
to obtain genuine Biphonic effect.
to obtain genuine Biphonic effect.
● When you use a microphone other than the Mic
for Biphonic during Biphonic Recording, you
cannot obtain an expected effect even if “
cannot obtain an expected effect even if “
ON”
or “
ON” is selected on the playback.
5
To start playback, press 4/9.
NOTES:
● Stereo speakers (incorporated in a TV) are
required for Biphonic playback.
● Biphonic effect is maximized in the following
cases:
• When you enjoy the video on a big screen TV.
• When the distance between the left and right
• When you enjoy the video on a big screen TV.
• When the distance between the left and right
speakers is sufficient.
• When you position at
front center of both
speakers.
speakers.
Biphonic Playback
GR-DF570_470PAL_05Video.fm Page 24 Wednesday, January 19, 2005 5:00 PM