Tyco Electronics M/A-COM Manual De Usuario

87 

During radio operation, various messages are displayed on either line 1 or line 2. Typical messages 
include control channel status information, such as system busy or call denied, or messages associated 
with the radio's operation, (i.e. volume adjust). These messages are described as follows: 

Talk-around 

Indicates the radio is operating on conventional channels in talk-around mode (no 
repeater). 

Volume Level 

Indicates the current volume level. The volume level display ranges from OFF (silent) 
to 31 (loudest). 

Caller's ID Not 
Received 

Indicates that an individual call is being received, but the caller's ID was not received. 

Type 99 Decode ON 

Indicates the Type 99 Decode feature is enabled. 

Type 99 Decode OFF 

Indicates the Type 99 Decode feature is disabled. 

Public Address ON 

Indicates that the public address function of the radio is enabled. 

Public Address OFF 

Momentary  (2  seconds) - indicates that public address function of the radio was 
disabled. 

External Alarm 
Enabled 

Indicates that the external alarm function of the radio is enabled. 

External Alarm 
Disabled 

Momentary (2 seconds) - indicates that the external alarm function of the radio was 
disabled. 

Private Mode 
Disabled 

Indicates that private mode is disabled or no encryption key has been programmed for 
the selected group/channel or special call. 

Forced Private 
Operation 

Indicates that forced private operation has been pre-programmed into the radio. 

Encryption Key 
Missing 

Flashing indicator indicates that no encryption key or an incorrect encryption key is 
programmed into the radio. 

Backlight 

Indicates the display intensity and keypad backlight level. 

Group ID 

Indicates that the call is a group call and is followed by the GID of the caller. 

Who Has Called 

This display indicates the number from the Who Has Called list. Individual calls 
received but not responded to are stored in a Who Has Called list. This list is 
accessible by pressing the # key and then the INDV key after the Individual call has 
timed out or the Clear button is pressed. This display is on line 2 and the LID of the 
caller is displayed on the top line. Currently the list is not implemented and the display 
will always be WHC=1. 

Phone Call 

Displayed when a phone call is received from the site. It is displayed in line 1 of the 
display. Line 2 of the display will contain the display *INDV* when line 1 contains this 
message. The radio interprets a received phone call as an individual call. 

 

Displayed when the menu key is pressed and remains displayed in line 1 until a menu 
item is selected. 

System = 1 - 64 

The system number for the current base station of the system displayed in line 1. It is 
displayed in line 2 of the display. Press the system key to obtain this display. 

Individual = 1 - 99 

Indicates which item in the individual call list is being displayed. It is displayed in line 2 
of the display. The name or ID of the item in the list is displayed in line 1 of the 
display. 

Phone = 1 - 99 

Indicates which item in the phone list is being displayed. It is displayed in line 2 of the 
display. Line 1 of the display will be the last 3 characters of the list item contents. 

Select Phone 

After pressing the PHN key, selecting an entry from the phone list by typing the entry 
number will display this message on line 1. 

Code Group and  
Revision Number 

This is the code group and revision number that is displayed in line 2 when the menu 
item “REVISION” is selected. The ‘gg’ is the group number of the software. The first ‘v’ 
is the hardware version and ‘vv’ is the revision of the software.