Tyco Electronics M7100IP Manual De Usuario

 

Install the radio’s antenna (refer to Table 2-1 for applicable antenna part numbers) in the center of 
the vehicle’s roof. These mobile antenna installation guidelines are limited to metal body motor 
vehicles or vehicles with appropriate ground planes. The antenna installation should additionally 
be in accordance with the following. 

•  The requirements of the antenna manufacturer/supplier included with the antenna. 
•  Instructions in the M7100

IP

 Radio Installation Manual, including minimum antenna cable 

lengths. 

•  The installation manual providing specific information of how to install the antennas to 

facilitate recommended operating distances to all potentially exposed persons. 

Use only the M/A-COM approved/supplied antenna(s) or approved replacement antenna. 
Unauthorized antennas, modifications, or attachments could damage the radio and may violate 
FCC regulations. 

 

 

Radios intended for motorcycle installations are factory-configured at 25 watts. It is 
important that radios not intended for motorcycle installations are not substituted for 
motorcycle radio units. 

 

 

Table 2-2 lists the recommended minimum lateral distance for a controlled environment 
and for unaware bystanders in an uncontrolled environment, from transmitting types of 
antennas (i.e., monopoles over a ground plane, or dipoles) at rated radio power for 
mobile radios installed on a motorcycle. Transmit only when unaware bystanders are at 
least the uncontrolled recommended minimum lateral distance away from the 
transmitting antenna.