ONKYO SKF-3600 Manual De Usuario

 

3

 

• Be sure to turn off your amplifier before connecting 

the speaker system. Connecting it while the amplifier 
is on may result in damage to the amplifier or the 
speaker system.

• The nominal impedance of this speaker system is 8

 

Ω

 

. 

Use only amplifiers capable of handling this imped-
ance.

• Use the supplied speaker cables to connect between 

the speaker’s input terminals and the amplifier’s 
speaker terminals as illustrated below.

• Be sure to connect the Right and Left speakers with 

the amplifier’s corresponding speaker terminals. 
Also, be sure that you are connecting the speaker’s 
positive (+) and negative (–) input terminals with the 
amplifier’s corresponding positive and negative 
speaker terminals. Otherwise, undesirable sound field 
or impaired bass-range reproduction will result.

• Before turning on the amplifier’s power switch, pull 

lightly on the speaker cables to ensure that they are 
connected securely.

• To prevent damage to circuitry, 

never short-circuit the positive 
(+) and negative (–) speaker 
wire.

• This speaker system can handle the specified input 

power when it is used for ordinary music reproduc-
tion. If the following abnormal signals are fed to the 
speaker, however, an overcurrent may flow in the 
internal circuits, causing burning or breakage of the 
wires even if the input power is below the specified 
rating.

1. Noise produced when FM station is not tuned in
2. Sound produced when fast-forwarding cassette

tape deck

3. High-frequency sound generated by an oscillator,

an electronic musical instruments, etc.

4. Oscillating amplifier signals
5. Special test signals produced by audio checking

CD, etc.

6. Sound produced when connecting or disconnect-

ing audio connection cables (Always turn off the
amplifier’s power before connecting or discon-
necting cables.)

7. Howling when a microphone is used

• Do not place magnetic objects such as screwdrivers 

and iron parts near the speaker system since they use 
speakers with  strong magnets. Otherwise, the objects 
may be attracted, causing injury or damaging the dia-
phragm.

SURROUND BACK

SPEAKER

FRONT

SPEAKERS

SURROUND

SPEAKERS

CENTER

SPEAKER

R

L

R

L

A

B

R

L

SKF-3600
Front right 
speaker

SKF-3600
Front left 
speaker

SKC-3600

Center speaker

SKM-3600
Surround right 
speaker

SKM-3600
Surround left 
speaker

Red

White

1. Strip the insulation of speaker

cables, and twist the core wires
tightly.

2. While pressing the lever, insert

the wire into the hole, and then
release the lever.

3. Make sure that the terminals

are gripping the core wires, not
the insulation.

Both SKC-3600 and SKM-3600 come with SKS-3600.